Enter your username:
Do you want to login or register?
  • Forgot your password?

    Login / Register



    Page 3 of 10 FirstFirst 1 2 3 4 5 6 7 8 ... LastLast
    Results 41 to 60 of 183
    1. #41
      Join Date
      Apr 2001
      Location
      The Netherlands
      Posts
      1,495
      Country Flag: Netherlands
      that's smart....using your bad knee to support the ratchet ;-)

      1st 2nd
      Pro-Touring outside the USA !
      Martin's Camaro Page


    2. #42
      Join Date
      Nov 2006
      Location
      Ma.
      Posts
      5,391
      Country Flag: United States
      Any updates Larry ??
      Wayne
      Car FINALLY home !!!!!! lol
      Project FNQUIK https://www.pro-touring.com/showthre...ghlight=FNQUIK

    3. #43
      Join Date
      Jan 2000
      Location
      Thousand Oaks California
      Posts
      9,802
      Country Flag: United States
      Smoothing the new oil pan before I install the baffles and install it

      Larry Callahan
      Founder/Administrator of Pro-Touring.com, G-Machines.com and HostMyJunk.com
      To advertise on Pro-Touring.com click here

    4. #44
      Join Date
      Jan 2000
      Location
      Thousand Oaks California
      Posts
      9,802
      Country Flag: United States
      These are so cool! I ordered a number of pre-printed wires from Ron Francis Wiring and it arrived today. Along with everything else you could possibly need they also sell stuff to make your life easier. These are only a few of the printed wires they sell. I ordered them for all four windows, power door locks, trunk release, backup lights, accessory lighting, air conditioning and more.













      Larry Callahan
      Founder/Administrator of Pro-Touring.com, G-Machines.com and HostMyJunk.com
      To advertise on Pro-Touring.com click here

    5. #45
      Join Date
      May 2001
      Location
      Mesa, Az.
      Posts
      1,431
      Country Flag: United States
      Larry any pictures of after the oil pan was tumbled?
      Phillip
      64 Studebaker Daytona Twin Turbo- http://bit.ly/1SgxQ0g
      65 Cutlass F-85 - http://bit.ly/1W4lJm4

    6. #46
      Join Date
      May 2012
      Location
      Thousand Oaks, CA
      Posts
      89
      Country Flag: United States
      Quote Originally Posted by Larry Callahan View Post
      Smoothing the new oil pan before I install the baffles and install it.
      Where did you have that done? I should do mine before I install it.

      shawn

    7. #47
      Join Date
      Nov 2006
      Location
      Ma.
      Posts
      5,391
      Country Flag: United States
      Nice to have access to all the cool toys! I'd like to see how it looks too. Larry are you painting the block or clear coating it to make it easier to keep clean? I'm thinking of doing mine in clear. I never noticed how rough the block is on an LS before.
      Wayne
      Car FINALLY home !!!!!! lol
      Project FNQUIK https://www.pro-touring.com/showthre...ghlight=FNQUIK

    8. #48
      Join Date
      Jan 2000
      Location
      Thousand Oaks California
      Posts
      9,802
      Country Flag: United States
      I will post pictures of it soon. I thought about clear coating the block but thought I would be nuts for doing it. Maybe it's not such a crazy idea?
      Larry Callahan
      Founder/Administrator of Pro-Touring.com, G-Machines.com and HostMyJunk.com
      To advertise on Pro-Touring.com click here

    9. #49
      Join Date
      Jan 2000
      Location
      Thousand Oaks California
      Posts
      9,802
      Country Flag: United States
      Quote Originally Posted by wally_245 View Post
      Where did you have that done? I should do mine before I install it.

      shawn
      I snuck it in at the day job.
      Larry Callahan
      Founder/Administrator of Pro-Touring.com, G-Machines.com and HostMyJunk.com
      To advertise on Pro-Touring.com click here

    10. #50
      Join Date
      Nov 2006
      Location
      Ma.
      Posts
      5,391
      Country Flag: United States
      Quote Originally Posted by Larry Callahan View Post
      I snuck it in at the day job.
      Larry how long will that have to run to smooth it out? A few days? Is it stainless steel pins in there for media?
      I was thinking of using Eastwood ceramic clear on my motor. I just don't want to use anything that will retain heat.
      Wayne
      Car FINALLY home !!!!!! lol
      Project FNQUIK https://www.pro-touring.com/showthre...ghlight=FNQUIK

    11. #51
      Join Date
      Jan 2000
      Location
      Thousand Oaks California
      Posts
      9,802
      Country Flag: United States
      Quote Originally Posted by Motown 454 View Post
      Larry how long will that have to run to smooth it out? A few days? Is it stainless steel pins in there for media?
      I was thinking of using Eastwood ceramic clear on my motor. I just don't want to use anything that will retain heat.
      They are ceramic triangles with an abrasive mixed in with it. It took a total of 3 hours and really I should have left it maybe another hour and I think I will do that on Monday and then show everyone what it did. I now wish I has shown it before. It was really rough and my Nephew cut himself on it twice while I was removing everything from it to prepare for deburring.
      Larry Callahan
      Founder/Administrator of Pro-Touring.com, G-Machines.com and HostMyJunk.com
      To advertise on Pro-Touring.com click here

    12. #52
      Join Date
      Jan 2000
      Location
      Thousand Oaks California
      Posts
      9,802
      Country Flag: United States
      I'm looking forward to having a decent stereo in MotiV8r. I've owned it for almost 30 years and in all that time it has never had working radio in it. I know I know, the sound of the engine should be all you need but you have to admit that after a few hours some tunes would really be nice. The many of the other features of the Pioneer AVIC-8100NEX will be nice as well. Navigation, Pandora, backup camera, hands free calls, voice commands, tire pressure monitoring and a capacitive touch screen will be nice as well.



      Larry Callahan
      Founder/Administrator of Pro-Touring.com, G-Machines.com and HostMyJunk.com
      To advertise on Pro-Touring.com click here

    13. #53
      Join Date
      Nov 2006
      Location
      Ma.
      Posts
      5,391
      Country Flag: United States
      MotiV8tr will be styling with that in her.
      Wayne
      Car FINALLY home !!!!!! lol
      Project FNQUIK https://www.pro-touring.com/showthre...ghlight=FNQUIK

    14. #54
      Join Date
      Aug 2004
      Location
      Ontario, Canada
      Posts
      2,310
      Country Flag: Canada
      Do you have access to a vibrating bin big enough for a cylinder block?

      Ken
      If there is a hard way to do something, I'll find it!
      My other car is a Vega.

    15. #55
      Join Date
      Jan 2000
      Location
      Thousand Oaks California
      Posts
      9,802
      Country Flag: United States
      Quote Originally Posted by Kenova View Post
      Do you have access to a vibrating bin big enough for a cylinder block?

      Ken
      I wish!
      Larry Callahan
      Founder/Administrator of Pro-Touring.com, G-Machines.com and HostMyJunk.com
      To advertise on Pro-Touring.com click here

    16. #56
      Join Date
      Nov 2006
      Location
      Ma.
      Posts
      5,391
      Country Flag: United States
      I never realized how rough the casting is on the outside of an LS block!
      Wayne
      Car FINALLY home !!!!!! lol
      Project FNQUIK https://www.pro-touring.com/showthre...ghlight=FNQUIK

    17. #57
      Join Date
      Jan 2000
      Location
      Thousand Oaks California
      Posts
      9,802
      Country Flag: United States
      Here is a slightly longer oil pan video showing the end results

      Larry Callahan
      Founder/Administrator of Pro-Touring.com, G-Machines.com and HostMyJunk.com
      To advertise on Pro-Touring.com click here

    18. #58
      Join Date
      Dec 2010
      Location
      Fredericksburg, VA.
      Posts
      3,125
      Country Flag: United States
      Larry,
      Question on the rear end. Since you sent it back to Moser did you give any consideration to converting it to a floater since it will have to be cut anyway? A 12 bolt floater would be pretty unique since most of them are based on 9" housings.
      Steve Hayes
      "Dust Off"
      68 Camaro

      Speed has never killed anyone. Suddenly becoming stationary, that's what gets you!
      "Jeremy Clarkson"

    19. #59
      Join Date
      Jan 2000
      Location
      Thousand Oaks California
      Posts
      9,802
      Country Flag: United States
      Quote Originally Posted by TheJDMan View Post
      Larry,
      Question on the rear end. Since you sent it back to Moser did you give any consideration to converting it to a floater since it will have to be cut anyway? A 12 bolt floater would be pretty unique since most of them are based on 9" housings.
      I did something even better and I'll be shooting video this weekend.

      I don't want to give away everything I did yet but I'll give you a hint. It's initials are ABS

      LOL!
      Larry Callahan
      Founder/Administrator of Pro-Touring.com, G-Machines.com and HostMyJunk.com
      To advertise on Pro-Touring.com click here

    20. #60
      Join Date
      Feb 2006
      Location
      Idaho Falls, Id
      Posts
      1,342
      Good stuff Larry, it's always cool to see a well built car get changes down the road.
      Traven

    Page 3 of 10 FirstFirst 1 2 3 4 5 6 7 8 ... LastLast