1991 Camaro Z28 clone

[qnitro]

So I need another project Like I need a hole in the head, I have the 78 Trans Am, wainting on paint, I have the Grand National Build.
I'll put the links at the bottom, But, I went ahead and started my 1991 Camaro(making it a Z28) Came pretty solid, all UMI Suspension, tubular cradle, control arms, pan hard rod sway bars, all the goodies, 4th gen rear end, C5 brakes, built LS2, built T56 with a monster clutch, 4th gen camaro fuel tank with upgraded pump, all the making for a good car.. of course I blew all the parts out.. It goes to paint in 2 weeks(just respray the factory white, same guy who fixes all my newer car paint issues) I have a new Scoggin-Dickey 427 LS3, TMS Heads, BTR came, did the Aeromotive tank with upgraded pumps, bought BC Forged wheels, going C6 Z06 brakes, bought quick performance rear end, have the Wegner accessory drive kit, going to get a Dakota digital dash.. keeping the factory AC, car should be awesome..I added the brackets in the trunk for the battery relocation, smoothed the engine bay area where the smog and Battery would go, covered the antenna hole. The pics with the motor is the old set up I yanked out and sold.. ohh and I bought another 91 just cause 1 person cant have enough 3rd gens


















Here are the other 2 projects Im working on..

https://www.pro-touring.com/threads/...tional-project

https://lateral-g.net/forums/showthr...ghlight=bandit

[LS1-IROC]

I need your problem. Gonna be tits when its done!