67 whippled-coyote fastback

[migg400]

Since I'm gonna be working on the interior for a while and wrapping up some wiring, I figured I'd add a Push Button Start which I think adds a nice personal touch! The functionality is Awesome too!!

[craigF]

Great build. I have been on & off mine for the last three years and about to do a 90% mock build before final body finish and paint. I read that you narrowed your rear seat to keep a reasonably standard look. Do you have any pictures as it is one part that is slightly puzzling me. Don't want to got the full custom interior route.
Can't wait to see more progress. Inspiring.

[ngiotta]

Subscribed. I'm doing a similar build, with a 1970 Mach 1. I have the same front end setup, sub-frame connectors and an F-150 Coyote too. The only difference is, I'm building it with twin turbos and a 6R80 transmission. I'm interested in your choice of radiator. Is that just an aftermarket S197 Coyote radiator?

[migg400]

Great build. I have been on & off mine for the last three years and about to do a 90% mock build before final body finish and paint. I read that you narrowed your rear seat to keep a reasonably standard look. Do you have any pictures as it is one part that is slightly puzzling me. Don't want to got the full custom interior route.
Can't wait to see more progress. Inspiring.

Thanks CraigF - I may have a few pics. If not, I'll try to take some this weekend. I still need to clean the frame up from cutting it down, and paint!

[migg400]

Subscribed. I'm doing a similar build, with a 1970 Mach 1. I have the same front end setup, sub-frame connectors and an F-150 Coyote too. The only difference is, I'm building it with twin turbos and a 6R80 transmission. I'm interested in your choice of radiator. Is that just an aftermarket S197 Coyote radiator?

ngiotta - Yes, it's an Aftermarket Aluminum OEM replacement for 05-14 Mustangs. It's made by Mishimoto, and it keeps it pretty cool.
Here is the link: https://www.mishimoto.com/ford-musta...rmance-05.html

[migg400]

I had a chance to get a little more work done on the Center Console.

[migg400]

More work!
Borrowed the climate control from the 16 Mustang, and added a few push buttons (fuel & water pump) from https://billetautomotivebuttons.com/#

[migg400]

fitted the face plate before wiring it up.

[migg400]

Got the 10.1 Android screen mounted. Hopefully it wont get in the way!!

[migg400]

Haven't posted in a while, but had some time to button up many things. I actually got her off the Jack stands and went for a spin!! (YouTube link: https://youtu.be/ClEV_SwcnVk)

[migg400]

I finally had time to cut the hood out for the Blower, and add the hood pins (20 GT500 style). I'm going to make some Aluminum cutouts to fill in the turn signal locations.

[andrewb70]

Looking tough!!!

[migg400]

Looking tough!!!

Much Appreciated!!!

[forced408]

Awesome looking build... What wheels and what are the specs on the tires?

[migg400]

Awesome looking build... What wheels and what are the specs on the tires?

Thanks!
The Wheels are Rovos Pretoria 18x10.5 rear (315/30/18), and 18x9 front (245/35/18).

[migg400]

Haven't posted in a long time, and I have way too many pics to load!
Figured sharing my YouTube link would probably be best for most current update.
Coyote Fastback - YouTube