Results 1 to 5 of 5
-
03-23-2022 #1
Registered User
- Join Date
- Nov 2016
- Location
- Sulphur, La
- Posts
- 599
69 Camaro: Squaring subframe and quadralink
Curious if you guys have input. I will be squaring everything up without an engine in the car and with the car on jack stands. I am wondering if you have seen differences in the measurements once the car is completed & on tis wheels vs the way mine will be done. Obviously the car will settle vertically some and wheelbase will change slightly but will the cross measurements change?
-
03-23-2022 #2
Registered User
- Join Date
- Sep 2010
- Location
- Beach Park IL
- Posts
- 2,849
I'm sure it changes.
I'm also sure you will never see it on a tape measure. I typically do it on a two post lift and my alignment guy rarely has to make adjustments for thrust angle.Donny
Support your local hot rod shop!
03-24-2022 #3
Registered User
- Join Date
- Nov 2016
- Location
- Sulphur, La
- Posts
- 599
I believe you are most likely correct although I'm pretty talented with that plumb bob!
03-25-2022 #4
Registered User
- Join Date
- Mar 2022
- Posts
- 1
Are you still selling? If so I can send you my number to discuss.
03-26-2022 #5
Registered User
- Join Date
- Nov 2016
- Location
- Sulphur, La
- Posts
- 599
It’s one of those situations where I don’t want to sell but I have my toy funds stretched thin with too many projects so I probably would sell it.
Reply With Quote
