Results 1 to 20 of 195
Threaded View
-
05-21-2019 #29
Registered User
- Join Date
- Jun 2011
- Location
- SoCal
- Posts
- 885
A little progress on the firewall. Also made some tabs for the tranny crossmember so it will unbolt and drop out from the bottom. Turns out the 4L80 I used for mock up had a different (more shallow) pan on it. The current pan hangs about .5" lower which means the engine had to go forward and up. Will be making the engine crossmember next.
www.totalcostinvolved.com"Quality doesn't cost, it pays"
-
Reply With Quote
