Results 41 to 60 of 131
-
02-03-2015 #41
Do you guys realize that you must do a bellhousing parallel alignment check and correction 1st before you plan what offset dowel pins are needed? Take a round circle and tilt it on a 45* and you are now looking through an oval.
Correcting the parallel alignment will change the concentric reading alignment. I have setup many QuickTime bellhousings and every QuickTime needed shims between the bellhousing and engine block to correct the parallel alignment. The we correct the concentric alignment as the second step.
To make the T56 QuickTime bellhousing alignment easier, install a button on the plunger. I have a button installed on my plunger on the picture posted above.Jody Haag
[email protected]
Most 4, 5, and 6 Speed Repairs, Parts, Service & Custom Installations
610-413-8015
Jody's Transmissions on Facebook
-
02-03-2015 #42
Here are the machine slotted shims installed to correct the bellhousing parallel alignment.Jody Haag
[email protected]
Most 4, 5, and 6 Speed Repairs, Parts, Service & Custom Installations
610-413-8015
Jody's Transmissions on Facebook
-
02-15-2015 #43Registered User
- Join Date
- Jul 2011
- Location
- Plano, Texas
- Posts
- 355