Make me want one... and there's a chopped one for sale on Craiglist near me... and I have a C7 Vette roller sitting out back...
Printable View
Make me want one... and there's a chopped one for sale on Craiglist near me... and I have a C7 Vette roller sitting out back...
number 3 all the way, Camaro bullet mirrors just don't look right
What about 65 Shelby R bullet mirrors on the doors?
http://store.cobraautomotive.com/mir...1-2-flat-lens/
Please don't put a LS motor in this beautiful car, that you have spent $100k and 5 years building, so 'cheap and easy' isn't part of the project.
Volvo had a 4.4L v8 that is correspondingly rare.
https://www.youtube.com/watch?v=P4Vh0eidjUg
Attachment 147504
https://www.ebay.com/i/142409857735?chn=ps
We've got a couple twin turbos that would be fun as well.
Or the new 2.0 that's turbocharged AND supercharged would be fun too.
I actually looked into a Volvo V8 as well as a Coyote engine. The Volvo was larger in every way than the Chevy and the Ford was just way too wide. The space in the engine compartment is very limited in the 1800. I just didn't think I could fit it in there and clear the crossmember and under the hood.
Another benefit of using the Chevy is the aftermarket support. To Make 600 hp in a Volvo V8 would be very expensive and would likely need the turbos Bob is suggesting. :)
Wow, don't have to be a dick about it. The "Volvo" V8 you showed wasn't even their engine, Yamaha made it for them.
Keep up the good work Darreld, don't mind the LS haters. They can build their own cars however they want. Maybe nimble will build an 1800 with his dream 4.4L Yamaha engine.
Your project, build it the way you want. I love the LS power plant.
I'm a Chevy fan, and LS lover. But also work for Volvo, so I can go either way. haha
If memory serves, that twin turbo Volvo motor from several years ago was about 300 horsepower.
Might as well put a B6294T in it
I have a 56 Chevy Nomad and LS would be a good choice. But maybe I should put in a Ford Coyote engine, it would be easier
and cheaper than a LS motor.
Anyone can build a car however they want, but everyone can also have an opinion, and mine is this awesome car will be 'cheapened' with a LS swap,
and that would be a shame.
And my opinion would be that 'cheapened' isn't the right word. I guess when you look at the cars you choose to build, that anything with an LS would be too common or normal. It takes a different kind to build a Corvair with an Audi engine. While Audi engines are cool, they probably don't have the same reliability of an LS motor. But for a rear engine, the Audi makes more sense. Same with a small block Ford in a road race Pinto. Another cool, off the beaten path project. I've got a couple friends like you who abhor the LS engines, and I think the hatred is misplaced. They're such versatile engine, with many build options. And having used an engine with very poor aftermarket support for parts, a 400M, I've grown to like and value the support of the aftermarket. Not having to custom make every little thing would be nice. And after putting an LS in a Jaguar XK8, I was really impressed with how easy they were wire. With options from 4.8L to 7.0L and above, the platform offers tons of options, which to me is cool. I'm sure this Volvo won't have an everyday run of the mill LS in it.
As I mentioned earlier the LS was not my first choice for the engine in this car. I did not choose the Volvo for a couple reasons. First it really is a Yamaha engine if we must be specific. The power output is only 300. They used the same 4.4L but in a twin turbo version to power the Noble and it was only 450 hp, 650 ish in full race trim. The is quite a bit less power but the complexity of the engine and setup in the car is significantly more expensive and difficult. The biggest issue is the height of the engine. The Volvo engine is too high for the car. I would have to drop it way down to the point I would need one hell of a skid plate or to raise it up and put on a snorkel scoop to fit it in the engine compartment. Neither options worked for me. Fitment was the main problem but power and complexity were a close 2nd and 3rd.
I hear you though that the LS may be over done on many cars. There is a good reason for that. Dependable power, aftermarket support and ease of electronics. The size of the engine was my problem and the reason this is not powered by a Volvo. I will admit it would have been a bit more cool if it was. Making a dry sump setup for the 4.4L may have been the solution for my fitment issues but I am not going to spend the time, money or energy to design that for an engine nobody else is using in aftermarket applications. The next issues was what transmission would I have used. I did not even go that far since I ran into so many other obstacles before that.
I really hate when people justify saying something rude by saying that it is there opinion. It's a BS excuse and clutters up an otherwise outstanding build. Please continue to build this car to your vision as it is one of the best builds on this site!! Top notch fabrication and vision.
Awesome build! Love all the great mods!
Pat
I think Trump would tell him to have a Coal powered engine, that would be a steam engine, but Trump wouldn't understand that,
he would only know his Lump is bigger than your Lump. ;)
I personally would put in a Volvo T5 with a bigger turbo, it would be MUCH lighter than a LS, but V8 are better eye candy.
Condescension aside....i used to be in the anti-LS camp. Having owned multiple european sports cars and high end sports sedans and currently owning a TT Audi v8, two Jaguar e-types and a porsche 911 carrera, I have had a bit of snobbery about overhead cams, exotic metal crankcases, blah, blah, blah... But with near 40 years of motoring experience behind me, I've become an LS convert. The DOHC design may give better ultimate breathing, but it moves a lot of weight to the top of the engine -- bad for the center of gravity. And it adds to the weight -- a direct affront to Colin Chapman's primary mandate: "add lightness". With how far the LS engines have been developed, it really is hard to find a motor that gives more power, at its weight, its compact dimensions and with its low center of gravity. There really is nothing like it. Forget trying to wedge a coyote or voodoo V8 into the P1800's engine bay, or many others for that matter. The width at the heads requires serious space between the strut towers. You can buy a hi-strung NA Audi or BMW V8 that'll get you maybe mid-400 HP, but it won't be lighter, it is unlikely to be as compact width-wise, and it'll have lost a lot of its torque getting to that HP level. That same HP and far more is easy out of an LS. The aftermarket support is insane and constantly growing. Bottom line -- anyone against an LS is coming from an irrational bias. It is a great engine that needs no apologies from anyone.
That's an assumption I've never been able to confirm. The T5 bare Long block to my understanding is 337 lbs...add manifold, turbo, etc. and I think you are in the mid-400 range. LS3 by contrast with manifolds is right around 400 I think. The LS can be built lighter. I like the idea of the T5, but nothing wrong with the LS plan IMO.
I think this is an awesome build. The LS is a good choice for the packaging and supports the low hoodline that helps make this car look fantastic.
I was able to attend an address delivered by the chief engineer for the LS1. He explained that the Corvette team was given a challenge to build a compact engine that had high power density. They were given the constraint that it had to load from the bottom and therefore fit between the frame rails. A quad cam V8 was too wide. Weight and exterior dimensions were key. The team was very successful in meeting their design goals. That is why the LS motor is so good for swaps. It is light, compact and delivers power. If I had the cash laying around, I would swap an LS7 in place of my 377 small block in a heartbeat.
I do like unusual powertrains for their aesthetic value, but when they do not fit or add mass to a car that would be detrimental to performance, I say use what fits the whole package. Such unique engines are best in show cars because of the compromises in performance that come with them. Also, it is hard to argue with the aftermarket support for the LS motors versus the more rare options.
This is a spectacular build that will not be diminished by an LS motor.
Keep up the great work!
This build thread has taken an interesting turn. I had no idea so many were actually following it. LOL!
Is this the point where I show another picture of my LS? I just finished putting on the new AFR 260cc Mongoose LS3 heads, trick flow push rods, Fast 102 Intake, ARP head bolts, Cometic gaskets, Yella Terra rockers and Improved Racing oil pan baffle. The bottom end is still stock (other than an Advanced Induction cam) but If I blow it up I will put in a stoker kit.
I would have loved to put in an LS7 but there is no space for an oil tank or room for the additional drive belt. It is a damn tight engine bay. Instead of the LS7 I put in an Accusump, baffle and oil cooler to help. I just hope that is enough to keep it lubricated on the track.
I checked on the suspension install yesterday. it is coming along nicely. They are about to weld in the front clip for the last time. It has been tacked in up to now. The next step will be to fabricate a crossmember for the torque arm to mount on. The crossmember will also function as the tranny mount as well. The last step is to mount the rear coilovers. I hope it is done by the end of the month. At that time I will take it home to mount the oil and tranny coolers, condenser, ac unit, find a place for the ECU and tranny controller. To do that I plan on changing the firewall on the passenger side.
To sum it all up, then, for the past day or so: the LS is generally not recognized as the devil but sometimes mistaken for it, the 4.4 Yamaha engine is sub-par for swaps and aftermarket, the Volvo white block isn't really a weight savings and still falls short of power goals with a stock bottom end and without a really big snail, a grand piano will fit in a chevy nomad as will a coyote engine, politics generally don't fly very well on internet forums, and Ron Sutton is already bench racing this thing (I think I would have peed a little if he was excited about any project of mine...) so I'm stoked to see the updates from this thread and this amazing build continuing to move forward!
My 2 cents...a car of this caliber, a "body/shell", is a container to fit the best engine/suspension/tires/whatever else into and still make a nice-looking cohesive vehicle which the owner enjoys driving/racing and enthusiasts can respect. So many of you have these lovely containers and use them as often as possible. I get the arguments to keep it in the family, anything but another LS, etc...and it's even worth saying sometimes, if we can keep it classy. I'm very much a hardcore Volvo fan and I LOVE what's being done with this thing, even the things I might not pick myself.
/soapbox
I totally agree:)
I love this build and think an LS motor makes perfect sense. I don’t know enough about Volvo’s to say if there is a brand specific alternative or not. But this is an amazing build with custom everything and I am sure the owner is going to want to have enough RELIABLE power to take advantage of the modifications.
I hate to prolong the off topic discussion but, when comparing even fully dressed weights, we need to also factor in block girdles, intercooler and piping plus any meth system needed to support the power levels of a 6.0+ liter LS from a 2.3L i5, especially if it means a 50 lb overall difference, not to mention packaging of those items (fmic in the nose of this car big enough?) Not to mention no longitudinal i5 ever produced so adapter weights for transmission, even seemingly negligible on its own. Just thoughts which I'm sure were evaluated by the builder initially...sorry, OP... I'll try to stay on topic going forward.
Can't wait to see it home and the firewall work for the controllers!
Yes...back to the build. It's awesome. My vote-no bullet mirrors on the fenders. The Singer porsches use window mounted chrome bullets typically and it looks great. But a more recent build has something a bit more modern and body colored and it too looks great.
https://static1.pt-content.com/image...rTeB50B9-1.jpg
But if you're going to preserve some exterior chrome I would look for a modern with chrome accents, a la Audi
I still like the bullet mirrors with the body/base painted body color and the mirror chrome...
Like DSE did on Moe's Charger: http://www.detroitspeed.com/Projects...rger-pg-1.html
Thanks for the input on the mirrors as well as the link to the Detroit Speed and Singer mirrors. They do look nice.
I just received my final renderings on my car. I am really happy with the direction that this project has gone. It has been a 6 year journey that should come to an end in the next year.
The suspension modifications should be done in the next month or so. After that I will bring the car home to mount oil coolers and other items like that. Once that is done it will head back to the body shop for mud work and paint.
I can finally see the end in sight and it will look almost exactly like the renderings. I can’t wait!https://static1.pt-content.com/image...8570a03c-1.jpg
https://static1.pt-content.com/image...357c17e3-1.jpg
https://static1.pt-content.com/image...96044e4e-1.jpg
That will be/is one sweet ride.