-
Oh man, I am such a fan of your project! Just seeing what you've done with an 18x8 garage...imagine if you had an 18x10!!! You have great taste and a helluva vision for bringing a project together. Your car would be bananas anywhere in america, I can't imagine how crazy it must be driving it around France(I know I'd give it more attention than a lambo for sure). Thanks for all the pics, would love a video if you get a chance!
-
thanks a lot man ! yes I'd like to work in a bigger garage with all stuff to work easier. I will make some videos when the car will be finished :)
my goal now is a 900-1000hp low boost street car, every luxury cars are now over 700hp, it's so easy to make big power now. I think 1000 is a good number, more than enough to eat porches, lambo, ferrari....etc but without buying ultra expensive parts
-
-
-
-
-
-
-
some good news today, a friend with his 1300hp awd chevelle will sell his Dart Littel M bloc, all forged internal, a compression ratio of 9.7:1. The solid-roller camshaft 255/262 degrees of duration at .050-inch lift, a prted Edelbrock Victor Jr. heads which now flow 310 c.f.m.
I will run it at 15psi of boost and see what happened, I hope around 900-1000hp :) and buy a other thrid member with 35 spline wavetrac differential
-
-
2 Attachment(s)
Very nice work .Nice attention to detail .I have a 1979 Z-28 RS .With a 377 cubic inc weiand 142 mini blowe small block .Chevy
-
-
-
-
Great progress and congrats on the write up!!
-
-
-
-
Finaly I've found some room to fit tubings from the firewal to the front subframe, driver side and passenger side tubes are different cause I can't bend them with the same angle because of the intercooler pipes but they fall approximatly at the same location on the subframe
I've ordered all needed to build a custom 3-piece splined sway bar and receveid today my new seats
I will use a 1.37" with 1-3/4 48 spline nascar sway bar from Speedway Engineering rated at 558 lbs at 15" ( about the same spring rate as the Speedtech 1 piece sway bar ) with custom bend arms
http://1speedway.com/index.php?route...&product_id=88
https://www.ebay.com/itm/CUSTOM-DELR...-/192461083932
https://www.onlinemetals.com/merchan...=2&top_cat=197
https://static1.pt-content.com/image...15492875-1.jpg
https://static1.pt-content.com/image...15795869-1.jpg
https://static1.pt-content.com/image...21902527-1.jpg
https://static1.pt-content.com/image...26302499-1.jpg
https://static1.pt-content.com/image...23658194-1.jpg
https://static1.pt-content.com/image...58808681-1.jpg
-