Building an extra bay for the lift.
- - - Updated - - -
Bendpak 10AS delivered
- - - Updated - - -
Extra depth concrete to approximately 18-20" in depth. Rebar and wire was also used here
- - - Updated - - -
Slab poured
Printable View
Building an extra bay for the lift.
- - - Updated - - -
Bendpak 10AS delivered
- - - Updated - - -
Extra depth concrete to approximately 18-20" in depth. Rebar and wire was also used here
- - - Updated - - -
Slab poured
Used 10" 304 stainless dowels epoxied in, instead of the 4" that came with the lift. We also braced it off at the top to the trusses in the ceiling.
- - - Updated - - -
Setting it all up
Almost done
Attachment 158117
- - - Updated - - -
This lift is probably one of the best investments I've ever made. FWIW
That is a great workspace.
Don
Thanks Don, I should have done this 15 years ago. We just installed an HVAC unit to heat and cool both sides about a month ago. So no more space heaters and window units. LOL
Very Nice!
I have the same lift, makes everything so much easier.
I just ordered the Challenger CL10V3 I believe is the correct #. Usa made. It's kinda asymmetrical and symmetrical technology.
My new Challenger CL10V3.
Just got to wire it up.
Man I'm glad my car is parked in it LOLAttachment 189410Attachment 189411Attachment 189412Attachment 189412Attachment 189413
Where did you get the lift from?
Interested in getting one here shortly, thanks
Either a Bend pak or a Challenger,
I bought my challenger through NAPA. It arrived and the pump was bad. Called napa and a rep was at my shop that night. Next morning challenger rep called, we discussed and they overnighted the new pump. I had it the next day. It was about 4800.00. could have got the same lift online about 4450.00 but I seriously doubt the service would have been as good.
The challenger is built very heavy compared to some friends lifts, be it rotary, eagle, and bemdpak. I'm exceptionally pleased.
Jason
Thanks Jason, even thought this was long ago, I have an older Challenger out back in pieces, I'm actually thing of putting it together, but I like the idea of new,