4 Attachment(s)
68 Chevelle Wiper Switch & Motor
Heeeeeeeelp. There is really no good info on how to connect wires to the motor and switch. My wire harness is an exact duplicate from Painless. I also have an original 68 wiper switch that has three pins as shown in the photo.
I've also included a page from my Harness wiring manual. Looking at the wiring diagram it would appear to be straight forward but I'm not good with wiring. There's 3 sets of wire that connect to the motor. There are 2 pins on the black housing and 3 pins just above the red and black wire. Which of those 3 sets of wires connect to which of the 5 pins. I think the brown connector connects to the 2 pins on the black housing but which way. Then the remaining 2 black connectors connect to the remains 3 pins but which way?
Then there's the wiper switch that has 3 pins. There's 3 wires labelled low/park, washer pump ground and high. Which of the 3 wires connects to which of the 3 pins?
This is last thing I have to do before my safety inspection which is tomorrow so I'm hoping someone out there is able to help.
Thanks so much for your help.
Perry