Printable View
So I hope I can accurately describe this for you guys! I am running a MP Holley terminator setup with an accufab 4150 throttle body …..but am wondering what I can do to modify the linkage so I can use my throttle cable on my northwind intake. With the shaker and drop base it needs to be in a traditional position much lower than this high thing that comes with the accufab. Anyone have any ideas? Thank you!
Attachment 195834
Bring back the answers to this forum!!!
Cut the arm down , and build a dog house into the bottom of the air cleaner base:worship:Attachment 196295Attachment 196296Attachment 196297Attachment 196298
Thank you! Looks great do you have anymore pics of the underside of cleaner base? And where did you get that cable and attachment?
Attachment 196561Attachment 196562Attachment 196563Attachment 196564
The linkage is not a cable it as a heim joint I found at an industrial supply store not an automotive store, it is threaded on to a 1/4 inch mild steel rod I custom bent and cut a thread with a die to screw the heim joint on, to make my throttle linkage, I will look for a pic of the mini heim.
Attachment 196566
I had to drill and tape the throttle body arm to match the threads on the heim
Quote:
Originally Posted by q67
thanks man! Ima give that a shot