Printable View
Great fabrication along the way on your car.......nice size garage too. I'm looking for a similar rad hose with 1.5" at both ends, any suggestion would be appreciated.
Keep up the good work!
Simon
- - - Updated - - -
Great fabrication along the way on your car.......nice size garage too. I'm looking for a similar rad hose with 1.5" at both ends, any suggestion would be appreciated.
Keep up the good work!
Simon
Duh! double post....sorry about that.
slazisme NAPA sells small rubber adapters ( forgot the name ) made of rubber you can ge them to reduce a larger hose to the size you need. Check their site.
Thank you ! It 26’ x 36’ x 9’ ceiling
We went to the parts store with a pcs of tig wire bent in the shape of the hose we needed and searched until we found something close!
You can also use one of the gates skink hose clamps to make one end a little bigger in diameter!
- - - Updated - - -
I had forgotten about Napa! That’s a good way to go as well. Thanks Wayne!
Attachment 163611Attachment 163612
Got 90percent of the insulation done. Going to start on the rusty tin for the ceiling next!
David, I realize about going down to the local parts store and matching up something, your pic posting on #247 is the reason I asked for a suggestion, it looks like the part number sticker is on the hose. If its off now, no worries I'll resort to plan 'B'.
Sorry I misunderstood your question!Quote:
Originally Posted by slazisme
I’ll check when I get home but I’m thinking it is off. if I can find the file on the car it will be in there!
Problem is the car is in my enclosed trailer and everything else is packed up in two connex trailers until the garage is finished!
Ok
So the part number is no longer on the hose and I didn’t have time to open up the connex trailers to look for it last night.
Sorry wish I could be more help!
Attachment 166328
Starting to look like a garage
��
Attachment 169433
Got most everything moved out of the connex trailers, i hope to get everything put away this weekend!
Garage looks great!
Thank you sir!Quote:
Originally Posted by Peter Mc Mahon
Nice job it looks Sweet!
Thank you sir!Quote:
Originally Posted by Motown 454
This is an interesting and good looking project! Seems like you've been at it for a while, but I beat you with several years! :) Keep up the good work! :)
Thank you sir!Quote:
Originally Posted by chevyz240
its ready to run just haven’t found the right person to tune it for me!
I have also started building an everyday driver 1970 Elcamino 😊