Awesome build !!!
I'm a little biased, but GREAT choice on the wheels. haha
Attachment 199073
Printable View
Awesome build !!!
I'm a little biased, but GREAT choice on the wheels. haha
Attachment 199073
Well here's where we are currently.
Still a work in progress, but I think it will work.
It's a right hand drive car & rack, but it shouldn't make too much difference?
It was looking really tight for the air intake to get past, so we've recessed the mount panel for the reservoir & the radiator overflow tank (recessed from the rear, so they actually move forward)
Hope it helps?
Attachment 199258Attachment 199257Attachment 199259Attachment 199260
And here's a pic with a dummy intake hose
Attachment 199261
So hopefully, it'll be something like that, and maybe all the sh*t will fit in.
But yes, it's definitely getting crowded in there. Maybe a Chevelle would have been a good idea! :-)
In case you didnt know, Those PSC resevoirs work great but the -10 outlet has to be above the power steering pump inlet to flow properly and not starve the pump. In other words, the fluid has to have a downhill run to the pump.
Hope this helps,
Evan Q.
Might be enough, If it isnt, the pump will be kinda noisy and make groaning noises. I used the same one on my son's C10 and its mounted much higher. I'd go for maximum height if hood clearance allows.
E.Attachment 199361
[QUOTE=EVO;1378476]Might be enough, If it isnt, the pump will be kinda noisy and make groaning noises. I used the same one on my son's C10 and its mounted much higher. I'd go for maximum height if hood clearance allows.
Ok got it, thanks!
Still moving along. Getting more exciting!
Attachment 199712Attachment 199713
I see you got a C and R radiator. I love mine it cools well.
Your build is looking fantastic..I know they are slow but you can see progress.
Keep it up.
Thanks Pal, still moving ahead!
Attachment 199822Attachment 199823
Still moving on!
Attachment 200020
Well, it's been a while but we're getting close now. Runs & drives, needs upholstery & the dash finishing, then front & rear glass in & we're done.
Attachment 210911
This must be very exciting. I can’t wait to be at that point.
Yep started in 2019, first bits ex Art Morrison arrived early 2020.
Long road, but it's looking gorgeous.
Hang in there, if it was easy every Muppet would be doing it!
I just can't help taking on really ambitious projects.
Here's the next stroke of madness!
Attachment 210918
Very cool build. Nice job! Do you have any details on the wheels?
Budnik Vapor, Brushed Rim Outers with Charcoal Center, Fat Lip
18x10 with 6.5bsp
18x12 with 7.0bsp
Vapor - BUDNIK