Problems bleeding clutch t56 magnum
I'm trying to bleed the hydraulics on my t56 magnum and I'm running into some issues. I started by filling the system using a Phoenix systems bleeder and pushing it up through the slave to the reservoir. I opened the bleeder, pumped the pedal one time, close the bleeder and let the pedal return. I did this about 6 times never letting the reservoir get completely empty. With the bleeder closed you cannot move the pedal, its hard as a rock. The pedal will only move with the bleeder open.
Is it possible I have a bad master? The only thing I did to the slave was install the remote bleeder line. Master and slave are both factory F body style.
Can anyone point me in the direction of how I should go about bleeding this system?