s4dustin
06-11-2013, 06:32 AM
I bought this car with the plan of it being our summer cruiser, but, with a kid on the way...it is a little too much for us. The wife and I talked about it and she doesn't love it...so one drive to the beach and it has got to go...I agree too....this is a lot of car..... over $50k in build receipts....
I have all the reciepts from the build from the owner which I bought the car off of.
The engine was rebuilt by Nelson Racing and installed at RODZ in Burbank, CA. 331 CI with a Vortect V2 Superchargher, Trick Flow intake, Cam, Ford Racing Headers, Upgraded 13in Cobra Brakes, Custom Radiator, Roll bar with built in tailight, custom susupension, Basani full crossed exhuast, Art Carr Built Trans, battery in trunk, heads done,...31 spline axles and rear end posi, back up camera with display in screen, SCT Live Wire...etc...the list goes on and on...as the receipts show (i can scan and email the receipts):
For Sale:
Very Special 1997 Mustang Convertible, heavily Modifiied
Additional Modifications:
5.0 Stroked to 331 Ci
Vortect V2 Supercharger $3500.00
Rear view mirrior and back up camera (camera) in mirror: $550.00
Upgraded 13inch Bullitt Brake kitDrilled/slotted rotors: $1500.00
Upgraded wheels and new tires: $1300.00
Carbon hood: $700.00
Carbon Wing (have but off car): $500.00
Engine:
5.0 Short Block $3800.00
Comp cam: $585.00
Heads: $900.00
Head Porting: $600.00
ARP head Studs: @285.00
ARP main studs: $129.00
Felpro head gasket: $120.00
Canton Oil Pan with Windage Tray: $415.00
Canton Pan Gasket: $30.00
FMS Block $325.00
OEM Ford gaskets: $325.00
IW Dampner $425.00
MEZ Waterpump: $350.00
MEZ Relay kit: $50.00
Melling Billet Gear oil pump: $300.00
FMS Headers $569.00
BBK Valve Covers $406.00
FMS Spark Plubs $82.00
MSD Coils (2) $152.00
Trick Flow Intake $800.00
Serpentine belt $92.00
AEM cold air: $426.00
Trans and motor mounts: $170.00
KB 20z BAP $249.00
BAS BX4697fs $490.00
CTN $187.50
FMS Suspension parts M-5400-a $545.00
Fabricate tubing $425.00
Polishing: $200.00
Misc: coolant,etc: $100.00
Rearend:
31 spline axles with whieel studs $324.00
31 spline posi: $300.00
Rear end baring kit $120.00
Upper and lower control arm kit: $200.00
FMS M-4033-g2 $200.00
FMS M-4062-j $289.00
Trans:
TCI $800.00
ArtCarr Spc Trans $2000.00
ARP bots: $40.00
PMA PA26478-8 $200.00
B&M shifter: $207.00
Orme Bros. Trans lines and fittings $334.00
Trans and rearend labor: $8500.00
Total parts and labor over $30k…so far…
More parts:
Racing Alternator, 200amp, chrome, and pitgtail: $482.00 plus install of $660.00
A/C servicing, new compressor, evap tube , accumulator, serpentine belt, $1556.00
Pull motor to do new cylinders….
Manley pstions and rings, gaskets, rods, main bearing, all gaskets, magna flux
Valves, guines, springs and seats, send to nelson racing for rebuild total costs on rebuild $15,570.00
Nelson rebuild:
Magnuflux
Hp grind on cam
Bore and hone with tq plate
Resize connecting rods small and big ends rpleace two rods
Weld up combusion chambers
Squeare deck block
Deck heads
Replace guines
Competition Valve Job
Balance rotating assembly
Hang pistons
File fit rings
Competition assembly
All new valves and engine bearings
Oil pump, valve guides, gaskets, timing components.. total $3400.00
Misc:
SCT Live wire: $600.00
I have literally owned this car since Saturday and it is a bit much for us with a kid on the way...I saw all the high performance parts and had to get it......baby on way in 6 months...car has got to go....I want to get my money out of it..not desperate....I don't sell, I will put the drivline into a 68 Fastback......email me for more info: Open to reasonable offers.....no leaks....very clean..
My other thoughts were to swap all the parts into a pro-touring project....but, with the kid on the way and 2 other projects going....I am out of space and time.....I will get pics of the under carriage by the weekend. There is a lot here....a lot!
https://static1.pt-content.com/images/pt/2013/06/P1017439_zps5be9357c-1.jpg (http://s279.photobucket.com/user/connectedmediagroup/media/1997%20Mustang%20For%20Sale/P1017439_zps5be9357c.jpg.html)
https://static1.pt-content.com/images/pt/2013/06/P1017440_zps832236cb-1.jpg (http://s279.photobucket.com/user/connectedmediagroup/media/1997%20Mustang%20For%20Sale/P1017440_zps832236cb.jpg.html)
https://static1.pt-content.com/images/pt/2013/06/P1017437_zpse73c1946-1.jpg (http://s279.photobucket.com/user/connectedmediagroup/media/1997%20Mustang%20For%20Sale/P1017437_zpse73c1946.jpg.html)
https://static1.pt-content.com/images/pt/2013/06/P1017442_zps3380db55-1.jpg (http://s279.photobucket.com/user/connectedmediagroup/media/1997%20Mustang%20For%20Sale/P1017442_zps3380db55.jpg.html)
https://static1.pt-content.com/images/pt/2013/06/P1017435_zps185d9381-1.jpg (http://s279.photobucket.com/user/connectedmediagroup/media/1997%20Mustang%20For%20Sale/P1017435_zps185d9381.jpg.html)
https://static1.pt-content.com/images/pt/2013/06/P1017451_zps1b6296cf-1.jpg (http://s279.photobucket.com/user/connectedmediagroup/media/1997%20Mustang%20For%20Sale/P1017451_zps1b6296cf.jpg.html)
https://static1.pt-content.com/images/pt/2013/06/P1017434_zps51b6f190-1.jpg (http://s279.photobucket.com/user/connectedmediagroup/media/1997%20Mustang%20For%20Sale/P1017434_zps51b6f190.jpg.html)
I have all the reciepts from the build from the owner which I bought the car off of.
The engine was rebuilt by Nelson Racing and installed at RODZ in Burbank, CA. 331 CI with a Vortect V2 Superchargher, Trick Flow intake, Cam, Ford Racing Headers, Upgraded 13in Cobra Brakes, Custom Radiator, Roll bar with built in tailight, custom susupension, Basani full crossed exhuast, Art Carr Built Trans, battery in trunk, heads done,...31 spline axles and rear end posi, back up camera with display in screen, SCT Live Wire...etc...the list goes on and on...as the receipts show (i can scan and email the receipts):
For Sale:
Very Special 1997 Mustang Convertible, heavily Modifiied
Additional Modifications:
5.0 Stroked to 331 Ci
Vortect V2 Supercharger $3500.00
Rear view mirrior and back up camera (camera) in mirror: $550.00
Upgraded 13inch Bullitt Brake kitDrilled/slotted rotors: $1500.00
Upgraded wheels and new tires: $1300.00
Carbon hood: $700.00
Carbon Wing (have but off car): $500.00
Engine:
5.0 Short Block $3800.00
Comp cam: $585.00
Heads: $900.00
Head Porting: $600.00
ARP head Studs: @285.00
ARP main studs: $129.00
Felpro head gasket: $120.00
Canton Oil Pan with Windage Tray: $415.00
Canton Pan Gasket: $30.00
FMS Block $325.00
OEM Ford gaskets: $325.00
IW Dampner $425.00
MEZ Waterpump: $350.00
MEZ Relay kit: $50.00
Melling Billet Gear oil pump: $300.00
FMS Headers $569.00
BBK Valve Covers $406.00
FMS Spark Plubs $82.00
MSD Coils (2) $152.00
Trick Flow Intake $800.00
Serpentine belt $92.00
AEM cold air: $426.00
Trans and motor mounts: $170.00
KB 20z BAP $249.00
BAS BX4697fs $490.00
CTN $187.50
FMS Suspension parts M-5400-a $545.00
Fabricate tubing $425.00
Polishing: $200.00
Misc: coolant,etc: $100.00
Rearend:
31 spline axles with whieel studs $324.00
31 spline posi: $300.00
Rear end baring kit $120.00
Upper and lower control arm kit: $200.00
FMS M-4033-g2 $200.00
FMS M-4062-j $289.00
Trans:
TCI $800.00
ArtCarr Spc Trans $2000.00
ARP bots: $40.00
PMA PA26478-8 $200.00
B&M shifter: $207.00
Orme Bros. Trans lines and fittings $334.00
Trans and rearend labor: $8500.00
Total parts and labor over $30k…so far…
More parts:
Racing Alternator, 200amp, chrome, and pitgtail: $482.00 plus install of $660.00
A/C servicing, new compressor, evap tube , accumulator, serpentine belt, $1556.00
Pull motor to do new cylinders….
Manley pstions and rings, gaskets, rods, main bearing, all gaskets, magna flux
Valves, guines, springs and seats, send to nelson racing for rebuild total costs on rebuild $15,570.00
Nelson rebuild:
Magnuflux
Hp grind on cam
Bore and hone with tq plate
Resize connecting rods small and big ends rpleace two rods
Weld up combusion chambers
Squeare deck block
Deck heads
Replace guines
Competition Valve Job
Balance rotating assembly
Hang pistons
File fit rings
Competition assembly
All new valves and engine bearings
Oil pump, valve guides, gaskets, timing components.. total $3400.00
Misc:
SCT Live wire: $600.00
I have literally owned this car since Saturday and it is a bit much for us with a kid on the way...I saw all the high performance parts and had to get it......baby on way in 6 months...car has got to go....I want to get my money out of it..not desperate....I don't sell, I will put the drivline into a 68 Fastback......email me for more info: Open to reasonable offers.....no leaks....very clean..
My other thoughts were to swap all the parts into a pro-touring project....but, with the kid on the way and 2 other projects going....I am out of space and time.....I will get pics of the under carriage by the weekend. There is a lot here....a lot!
https://static1.pt-content.com/images/pt/2013/06/P1017439_zps5be9357c-1.jpg (http://s279.photobucket.com/user/connectedmediagroup/media/1997%20Mustang%20For%20Sale/P1017439_zps5be9357c.jpg.html)
https://static1.pt-content.com/images/pt/2013/06/P1017440_zps832236cb-1.jpg (http://s279.photobucket.com/user/connectedmediagroup/media/1997%20Mustang%20For%20Sale/P1017440_zps832236cb.jpg.html)
https://static1.pt-content.com/images/pt/2013/06/P1017437_zpse73c1946-1.jpg (http://s279.photobucket.com/user/connectedmediagroup/media/1997%20Mustang%20For%20Sale/P1017437_zpse73c1946.jpg.html)
https://static1.pt-content.com/images/pt/2013/06/P1017442_zps3380db55-1.jpg (http://s279.photobucket.com/user/connectedmediagroup/media/1997%20Mustang%20For%20Sale/P1017442_zps3380db55.jpg.html)
https://static1.pt-content.com/images/pt/2013/06/P1017435_zps185d9381-1.jpg (http://s279.photobucket.com/user/connectedmediagroup/media/1997%20Mustang%20For%20Sale/P1017435_zps185d9381.jpg.html)
https://static1.pt-content.com/images/pt/2013/06/P1017451_zps1b6296cf-1.jpg (http://s279.photobucket.com/user/connectedmediagroup/media/1997%20Mustang%20For%20Sale/P1017451_zps1b6296cf.jpg.html)
https://static1.pt-content.com/images/pt/2013/06/P1017434_zps51b6f190-1.jpg (http://s279.photobucket.com/user/connectedmediagroup/media/1997%20Mustang%20For%20Sale/P1017434_zps51b6f190.jpg.html)