Blevinator
06-03-2013, 09:25 AM
Hello,
I decided to go a different route, so selling my LS3. Engine was pulled from a 2011 Camaro with 7k miles.
Seller paid East Coast Supercharging to set up motor for more power. $3000 in parts
and labor was paid to have this done. Engine will include intake manifold, injectors, fuel rails, throttle body (2011 Camaro style , brand new), crank pulley (2011 Camaro),valve covers.
This is a great engine if you want an LS3 with more power than stock (cam is a mid 230's with a 605 lift on a 114 LSA) but still drive like stock. Stock LS3's are 6k new.
Get this upgraded motor for much less.
Heres my build if interested:
https://www.pro-touring.com/showthread.php?83957-Infinity-Camaro-LS3-Project
Located in Texas. Can ship. Shipping estimates (freight) are from $250-300.
Can get exact with your zip code.
I have the receipt from ECS. I copy and pasted info from the receipt below.
I can send the actual East Coast Supercharging invoice dated 8-2012 to anyone interested.
LS1 "ECS Blower Cam" 3 bolt core 1 419.00 419.00T
PRC Dual Spring Kit - Includes Titanium Retainers, Titanium Seats,
Viton Valve Seals, Dual Springs
1 325.00 325.00T
Katech C5R timing chain ONLY 1 149.00 149.00T
Mellings High Volume Oil Pump 1 149.00 149.00T
TFS 7.400" Pushrod Set (Need to measure and order) 1 99.95 99.95T
GM Balancer Bolt, All LSx Except LS7/9/A 1 5.51 5.51T
GM Front Main Seal, All LSx 1 27.24 27.24T
GM Camshaft Timing Gear Bolt, 3-Bolt Style.. Price each 3 3.65 10.95T
GM Camshaft Timing Gear, LS7 3-Bolt 4-Phase 24.44 24.44T
Install all above cam components, customer supplied Headers and 3.25
Upper pulley also customer supplied
1,200.00 1,200.00T
Full Dyno Tune F/I Car - MAF 649.00 649.00T
GM Timing Chain Damper, Gen IV 19.72 19.72T
Hourly Install Labor Install customer supplied mid section and cat back 2 109.00 218.00T
$4200.
I decided to go a different route, so selling my LS3. Engine was pulled from a 2011 Camaro with 7k miles.
Seller paid East Coast Supercharging to set up motor for more power. $3000 in parts
and labor was paid to have this done. Engine will include intake manifold, injectors, fuel rails, throttle body (2011 Camaro style , brand new), crank pulley (2011 Camaro),valve covers.
This is a great engine if you want an LS3 with more power than stock (cam is a mid 230's with a 605 lift on a 114 LSA) but still drive like stock. Stock LS3's are 6k new.
Get this upgraded motor for much less.
Heres my build if interested:
https://www.pro-touring.com/showthread.php?83957-Infinity-Camaro-LS3-Project
Located in Texas. Can ship. Shipping estimates (freight) are from $250-300.
Can get exact with your zip code.
I have the receipt from ECS. I copy and pasted info from the receipt below.
I can send the actual East Coast Supercharging invoice dated 8-2012 to anyone interested.
LS1 "ECS Blower Cam" 3 bolt core 1 419.00 419.00T
PRC Dual Spring Kit - Includes Titanium Retainers, Titanium Seats,
Viton Valve Seals, Dual Springs
1 325.00 325.00T
Katech C5R timing chain ONLY 1 149.00 149.00T
Mellings High Volume Oil Pump 1 149.00 149.00T
TFS 7.400" Pushrod Set (Need to measure and order) 1 99.95 99.95T
GM Balancer Bolt, All LSx Except LS7/9/A 1 5.51 5.51T
GM Front Main Seal, All LSx 1 27.24 27.24T
GM Camshaft Timing Gear Bolt, 3-Bolt Style.. Price each 3 3.65 10.95T
GM Camshaft Timing Gear, LS7 3-Bolt 4-Phase 24.44 24.44T
Install all above cam components, customer supplied Headers and 3.25
Upper pulley also customer supplied
1,200.00 1,200.00T
Full Dyno Tune F/I Car - MAF 649.00 649.00T
GM Timing Chain Damper, Gen IV 19.72 19.72T
Hourly Install Labor Install customer supplied mid section and cat back 2 109.00 218.00T
$4200.