srh3trinity
05-20-2013, 01:31 PM
So, I have had my G8 GT for about 4 months and I love the car. It has the stock 19's on it with relatively new tires. I usually am not a big fan of GM wheel design, but these don't look that bad. I have a set of 18 inch wheels that I bought as rollers for my Firebird project and was going to run them until I saved up enough to buy a custom set, but now that I went with an aftermarket subframe, they won't work. These are Privat Legende's made by Konig and are for BMW so they actually bolt up to the G8. I rolled them out today and realized that I didn't have the right size lugs, so I just put the front on to see what it looked like. Then I just propped them up to get a feel. What are your thoughts?
https://static1.pt-content.com/images/noimg.gif (http://s838.photobucket.com/user/srh3trinity/media/20130520_154157_zps8d4caf33.jpg.html)
https://static1.pt-content.com/images/pt/2013/05/20130520_160011_zpsdcab33f9-1.jpg (http://s838.photobucket.com/user/srh3trinity/media/20130520_160011_zpsdcab33f9.jpg.html)
https://static1.pt-content.com/images/pt/2013/05/20130520_160138_zps79038abd-1.jpg (http://s838.photobucket.com/user/srh3trinity/media/20130520_160138_zps79038abd.jpg.html)
https://static1.pt-content.com/images/pt/2013/05/20130520_160151_zps48e85e71-1.jpg (http://s838.photobucket.com/user/srh3trinity/media/20130520_160151_zps48e85e71.jpg.html)
Here is one in stock form for reference:
https://static1.pt-content.com/images/pt/2013/05/20130516_194516_zps391ae8db-1.jpg (http://s838.photobucket.com/user/srh3trinity/media/20130516_194516_zps391ae8db.jpg.html)
I want to bring the back down an inch and if I leave the stockers for a while, I may plasti-dip them in a gunmetal.
https://static1.pt-content.com/images/noimg.gif (http://s838.photobucket.com/user/srh3trinity/media/20130520_154157_zps8d4caf33.jpg.html)
https://static1.pt-content.com/images/pt/2013/05/20130520_160011_zpsdcab33f9-1.jpg (http://s838.photobucket.com/user/srh3trinity/media/20130520_160011_zpsdcab33f9.jpg.html)
https://static1.pt-content.com/images/pt/2013/05/20130520_160138_zps79038abd-1.jpg (http://s838.photobucket.com/user/srh3trinity/media/20130520_160138_zps79038abd.jpg.html)
https://static1.pt-content.com/images/pt/2013/05/20130520_160151_zps48e85e71-1.jpg (http://s838.photobucket.com/user/srh3trinity/media/20130520_160151_zps48e85e71.jpg.html)
Here is one in stock form for reference:
https://static1.pt-content.com/images/pt/2013/05/20130516_194516_zps391ae8db-1.jpg (http://s838.photobucket.com/user/srh3trinity/media/20130516_194516_zps391ae8db.jpg.html)
I want to bring the back down an inch and if I leave the stockers for a while, I may plasti-dip them in a gunmetal.