Johnny Blaze
05-17-2013, 10:36 AM
I bought these wheels new 3 years ago, paid $700 shipped.
Email me at clownj at yahoo.com for fast response.
Found out the fronts would not clear the hub, took them to a Large CNC Machine Shop in Louisville, KY that does industrial stuff, gave them a stock brake rotor to use for measurement. They then bored the front hub holes to clear. Very well done. Cost me $100.
Then on a whim, I ordered some Vintage Racing Gold wheel paint from Eastwood, and got carried away and did a quick spray paint job on them.
IMO, they should be striped to bare and repainted or polished.
Last week I bought different wheels and will not be using these.
The fronts are 18"x8.5" 13mm offset
The rears are 18"x9.5" 15mm offset
They fit all around with no need for spacers.
Lug nuts as well as socket are included. Unfortuantly I am 2 lug nuts short, when I bought them they sent me 2 that were wrong, I did not notice that till sometime later.
Because of the paint issue, I am only asking $300 for the set, plus shipping. I feel the price is bottom dollar, no reason to ask more so I can negotiate, I think it is a very fair price. My lose your gain!
These wheels have never had a tire mounted on them, and have been boxed up most of the time I have had them.
I am located in Southern Indiana, near Louisville, KY. Willing to drive a reasonable distance to meet.
Front wheel.
https://static1.pt-content.com/images/pt/2013/05/5a9158a5c56e7dca394e0d6cc5f5bb30_zpsa47c-1.jpg (http://s23.photobucket.com/user/clownj1988/media/5a9158a5c56e7dca394e0d6cc5f5bb30_zpsa47c9fb9.jpg.h tml)
It is not bent thats just a wierd lighting issue,
Rear https://static1.pt-content.com/images/pt/2013/05/428868588409e50b936f364b825cef86_zps7f19-1.jpg (http://s23.photobucket.com/user/clownj1988/media/428868588409e50b936f364b825cef86_zps7f19440d.jpg.h tml)wheel,
Email me at clownj at yahoo.com for fast response.
Found out the fronts would not clear the hub, took them to a Large CNC Machine Shop in Louisville, KY that does industrial stuff, gave them a stock brake rotor to use for measurement. They then bored the front hub holes to clear. Very well done. Cost me $100.
Then on a whim, I ordered some Vintage Racing Gold wheel paint from Eastwood, and got carried away and did a quick spray paint job on them.
IMO, they should be striped to bare and repainted or polished.
Last week I bought different wheels and will not be using these.
The fronts are 18"x8.5" 13mm offset
The rears are 18"x9.5" 15mm offset
They fit all around with no need for spacers.
Lug nuts as well as socket are included. Unfortuantly I am 2 lug nuts short, when I bought them they sent me 2 that were wrong, I did not notice that till sometime later.
Because of the paint issue, I am only asking $300 for the set, plus shipping. I feel the price is bottom dollar, no reason to ask more so I can negotiate, I think it is a very fair price. My lose your gain!
These wheels have never had a tire mounted on them, and have been boxed up most of the time I have had them.
I am located in Southern Indiana, near Louisville, KY. Willing to drive a reasonable distance to meet.
Front wheel.
https://static1.pt-content.com/images/pt/2013/05/5a9158a5c56e7dca394e0d6cc5f5bb30_zpsa47c-1.jpg (http://s23.photobucket.com/user/clownj1988/media/5a9158a5c56e7dca394e0d6cc5f5bb30_zpsa47c9fb9.jpg.h tml)
It is not bent thats just a wierd lighting issue,
Rear https://static1.pt-content.com/images/pt/2013/05/428868588409e50b936f364b825cef86_zps7f19-1.jpg (http://s23.photobucket.com/user/clownj1988/media/428868588409e50b936f364b825cef86_zps7f19440d.jpg.h tml)wheel,