GeoffP
04-09-2013, 07:10 PM
Ok so I'm sitting here wondering what shops are still open in the south east that can handle doing some fine tuning on a RideTech 4 link and install new gears in my axle? I'm not looking to get taken for a ride since my funds are VERY limited. I want to get the cradle welded in place, get the pinion angle corrected (amateur install put the tabs in the wrong spot - not bad but bad enough that they need to be cut off and reinstalled) and install a new gear set in the rear end. I posted this in the suspension section thinking it was the most obvious place. Thanks for any suggestions!