Morris 3 Point Seat Belts-Headline??

[Phillip_L]

I am trying to install a set of 3-point seat belts into a 1969 Camaro. The headliner has been replaced and this car does not have a factory shoulder belt (or it has been removed). Is there a easy way find the mounting points? Do I need to pull down the headliner to have a peak? How do you remove the headliner properly? I have no experience with interior work and I am afraid to just start removing stuff. I am not sure where the clips are, what is glued, etc.

Thanks.

Phillip

[morrisclassic]

Phillip,

I hope you are putting in a set of our seatbelts.
Measure 9 inches from the quarter glass rubber
seal, then 1 1/2 " up on the sail panel is the first bolt.
The second bolt is 2 1/8 inches further back.
I hope this helps. If you have any more questions let us know.

Billy

[Phillip_L]

Thanks for the reply. I can not find your website or phone number.

[morrisclassic]

Philip,

Our web site is www.morrisclassicconcepts.com (http://www.morrisclassicconcepts.com),
Phone number is 864-987-0032. You can take the sail panel out and feel behind it to locate the mounting holes.If you need anymore help call us, we'll be glad to help.

Thank You, Billy

[Phillip_L]

You're directions were perfect. They bolted right up. Hopefully, I never find out if they work.

Phillip

[morrisclassic]

Philip,

Glad to help. Thank You for your purchase.
Did you look at our other parts at www.morrisclassicconcepts.com (http://www.morrisclassicconcepts.com) ?

Thanks Again, Billy & Robin