ls3 swap 65 Chevelle

[DroptopJ]

I just bought 65 chevelle & I'm putting in an ls3 with a 4l65e transmission in it. I'm trying to find out what works best for this install? Headers, engine & trans mounts, engine harness & fuel tank setup?

[SparkyRnD]

we have a radiator that is set up for the LS in that application :)

[SparkyRnD]

for headers and mounts, talk to Jeff Georges at BRP Hot Rods (http://www.brphotrods.com). We are running their headers, engine mounts and crossmember in Project Sabre. It's all bolt-in stuff.

[DroptopJ]

Thanks, I'll look into that. I guess there's not a lot of 65 chevelle people on here.

[CFster]

Yeah but there's a lot of 64-72 Chevelle, GTO, 442 etc. people on here. It's all the same...

[1989GTA]

I am putting a L92 and 6L80 into a 65 Buick Skylark. The install of those parts are about 2 weeks off. I have selected the Dirty Dingo sliders and the tall and narrow stands. Going with Hedmans 1/3/4" to 1 7/8" long tube stepped headers. When you select your headers you need to know what engine mounts they recommend.