PDA

View Full Version : Kenne bell supercharger for 6.1 hemi any ideas???



bret loibl
02-18-2013, 11:33 AM
Hello iam doing a 70 cuda with a late model 6.1 hemi and thinking about the kenne bell 2.8 blower...called the tech line but not much help...looking at the tuner kit ...iam in the process of gathering parts so i will need a stand alone harness and ecm, a nice fuel pump etc. i want respectable hp but nothing crazy so if any one has any ideas on this or any other combo please tell Thanks Bret

rjsjea
02-19-2013, 09:28 AM
Give a shout to Dave Weber at ModernMusclePerformance.

Check out LxForums too. For a standalone harness, FAST sells a complete kit, or Dave Weber sells a facory ECU/harness for the swap and can plan out/sell you your fuel system.

sccacuda
02-19-2013, 10:01 AM
I did this car for a customer a few years ago. The kit is very good. Kenne Bell is thorough. Drivability was awesome, as well as the tune provided. They have it sorted. You will just need a stock 6.1 PCM and use the Bell tune that comes with the kit. This kit uses a boost-a-pump setup to increase voltage to the stock pump relative to boost. I've done quite a few more since, so PM me if I can answer any questions related to install. If your near me, I can build the harness and supply the PCM, but that is not something I sell outright or ship. I build each one specific to the install and like to have the car in the shop.

https://static1.pt-content.com/images/pt/2013/02/file_zpsecb66794-1.jpg
https://static1.pt-content.com/images/pt/2013/02/file_zps6c8cbdba-1.jpg

Motorcitydak
02-19-2013, 07:11 PM
??? http://www.edelbrock.com/automotive_new/mc/superchargers/chrysler/competition.shtml