SparkyRnD
02-08-2013, 08:34 AM
We are finished prototyping, and are releasing our radiator for the early Chevrolet and GMC C10 pickups, for 1963-1966 models! These may fit 61 & 62's as well, but we haven't confirmed yet. These are as thick as a four core radiator (we use dual 1" thick cores, for a total core thickness of 2"). We will have these set up for 6-cylinders, small blocks, big blocks and LS Conversions. These are a direct fit with no cutting or welding to the original core support.
The unit shown was for a customer that wanted a stock replacement. We are hoping that people can use their stock fan shroud with this set up. We will also carry a fan & shroud kit for this style, just like all of our other radiators. They also include a trans cooler unless you request to have it built without one. These are available for purchase on our site.
These can be built for stock motors, big blocks, engine swaps and LS motors (with both inlet and outlet on the passenger side, including the steam port). Retail price is $450, and PT.com member price is $425.
https://static1.pt-content.com/images/pt/2013/02/EC10a-1.jpg
The unit shown was for a customer that wanted a stock replacement. We are hoping that people can use their stock fan shroud with this set up. We will also carry a fan & shroud kit for this style, just like all of our other radiators. They also include a trans cooler unless you request to have it built without one. These are available for purchase on our site.
These can be built for stock motors, big blocks, engine swaps and LS motors (with both inlet and outlet on the passenger side, including the steam port). Retail price is $450, and PT.com member price is $425.
https://static1.pt-content.com/images/pt/2013/02/EC10a-1.jpg