mcraw66chevy
02-07-2013, 10:02 PM
Guys ive built a new style cover panel to close out the area between header panel and radiator support . This has been done in many differant ways i do think mine is completely differant that Cover Craft and Detroit Speed and both theres look great just wanted something a little differant . Im building these out of fiberglass you still use all your factory latch it covers it up it will come with all instructions an pics to install . Theres two ways to install .
The orange car im still modifing to remove the safety latch ,hood latch and hood stops to be replaced with the new Quik latch hood pins so none of that was needed . The blue item is a complete product is the color they will come in . Im using blue jel-coat so this is how they will come , There will also be an optional polished latch cover to keep from scratching the paint as seen in pics . Im about a week away from selling what you think , and is there anything you would change before going into production , Im thinking there gonna sell for 200.00 and 50.00 for the polished latch spring cover .
These panels are very slick a red scotchbrite will almost prep for paint of you color or choice . open to all ideas .
thanks mike
The orange car im still modifing to remove the safety latch ,hood latch and hood stops to be replaced with the new Quik latch hood pins so none of that was needed . The blue item is a complete product is the color they will come in . Im using blue jel-coat so this is how they will come , There will also be an optional polished latch cover to keep from scratching the paint as seen in pics . Im about a week away from selling what you think , and is there anything you would change before going into production , Im thinking there gonna sell for 200.00 and 50.00 for the polished latch spring cover .
These panels are very slick a red scotchbrite will almost prep for paint of you color or choice . open to all ideas .
thanks mike