Viper T-56 6 speed transmission

[Motorcitydak]

Turns out this will not work for my project. I am selling a t56 6 speed trans from a 1999 Dodge Viper. I have completely disassembled it so I could change the main shaft to what I need, turns out it will not work. Condition of all parts is good. I did chip a small part of the 3-4 synchro assy removing it but it does not look too bad. Also I lost some of the keys but was going to run billet ones anyways and the bearing for the front of the main shaft got damaged when I pulled it off. These are rather easy to reassemble and could be done with no press, just a few tubes and tools. I really need to keep the Viper mid plate, would also like to keep the steel 3-4 shifter fork. Prices are $1100 for everything, $900 if I keep the mid plate and $850 if I keep the mid plate and shifter fork (they sell for around $60 from any trans parts place). I do not know the mileage of the car but the fluid looked great and there were no bits of metal on the magnets. Everything looks great and I found no evidence of damage anywhere. All prices are +shipping, located in SE Mi. I could fit everything into 2-3 boxes so shipping will be pretty easy.

https://static1.pt-content.com/images/pt/2013/01/DSCF2125_zps9d92e21e-1.jpg

https://static1.pt-content.com/images/pt/2013/01/DSCF2124_zpscfcb3e94-1.jpg

https://static1.pt-content.com/images/pt/2013/01/DSCF2123_zps76572bf9-1.jpg

https://static1.pt-content.com/images/pt/2013/02/DSCF2158_zps45a6e27c-1.jpg

https://static1.pt-content.com/images/pt/2013/02/DSCF2160_zps7fb2747e-1.jpg

https://static1.pt-content.com/images/pt/2013/02/DSCF2157_zps67940b72-1.jpg

[Motorcitydak]

Bump, new trans is on its way. Want this one sold

[Barrrf]

Dude, if it was June, I would drive down to wherever in SE, MI you are. But alas. The timing is not correct.

[Motorcitydak]

Well, snow should be gone mid week or so

[Barrrf]

LOL its not the snow thats stopping me.

$$$$$$

I'll be down there for the swap meet at the Tech Center coming up in May.

[clu269]

i am interested PM me. What would it take to put behind BBB in grand sport?

[Motorcitydak]

Bump again. New trans just got here so I have a really nice crate to ship this in

[rchaskin]

Free bump for some over the top organizational skills!!!

[Motorcitydak]

Lol, thanks! I can include a C5 Corvette mid plate with this as well, no charge for that

[Motorcitydak]

Pay day bump!

[Takid455]

Is tag # 1386-XXX or Tuet-xxxx?

[Motorcitydak]

Tag is 13-86-018, PN4874459
1386-000-018 1996-2002 Dodge Viper 450tq 2.66:1 1st 1.78:1 2nd 1.30:1 3rd 1.00:1 4th 0.74:1 5th 0.50:1 6th 2.90:1 Rev 26 spline input 30 spline output

[Motorcitydak]

Shipping in 3 boxes should run around $80-$120 depending on location and does not have to go freight