kalky99
01-22-2013, 12:30 AM
Up for sale is a 70 Nova that i started pro touring about 4 years ago. I am wanting to get rid of this project because i no longer have the time to finish it anymore due to moving out of state for a job. There has been alot of time put into this build and hopefully someone will finish it. Car has clean title in hand!!
First off the frame was changed from a unibody to full frame sense i was lowering the body over the frame. Car was built with 5 1/2" ride heigth in front and 6" in the back. Doors were setup for electric windows and i eliminated the quarter window and installed a full window in the doors along with solenoid poppers for the bear claw latches. Rear end was narrowed and had strange build axles along with aluminum center section. There's plenty of more stuff done to the project but if you have any questions please ask and i will be glad to answer them. Would consider helping deliver depending on distance.
I am asking $5000.
Parts included
Billet Specialty wheels 18"x8 Front _ 18" x 12 Back
Mickey Thompson - Sportsman S/R Radials - Front 26"x8" x 18" , Rear 30"x12"x 18"
Wilwood brakes Front 14" rotors 6 piston calipers
Wilwood Brakes Rear 12.25" rotors 4 piston calipers w/E-Brake
Strange Aluminum 9" center section w 4.30 gears and detroit locker.
Strange axles cut to fit housing.
Goodmark sheet metal - fenders, doors, quarters, trunk lid.
New Front spindles
Tubular upper and lower control arms.
Bear Claw latches from autoloc
Autoloc solenoids for door latches
Electric window motors
First off the frame was changed from a unibody to full frame sense i was lowering the body over the frame. Car was built with 5 1/2" ride heigth in front and 6" in the back. Doors were setup for electric windows and i eliminated the quarter window and installed a full window in the doors along with solenoid poppers for the bear claw latches. Rear end was narrowed and had strange build axles along with aluminum center section. There's plenty of more stuff done to the project but if you have any questions please ask and i will be glad to answer them. Would consider helping deliver depending on distance.
I am asking $5000.
Parts included
Billet Specialty wheels 18"x8 Front _ 18" x 12 Back
Mickey Thompson - Sportsman S/R Radials - Front 26"x8" x 18" , Rear 30"x12"x 18"
Wilwood brakes Front 14" rotors 6 piston calipers
Wilwood Brakes Rear 12.25" rotors 4 piston calipers w/E-Brake
Strange Aluminum 9" center section w 4.30 gears and detroit locker.
Strange axles cut to fit housing.
Goodmark sheet metal - fenders, doors, quarters, trunk lid.
New Front spindles
Tubular upper and lower control arms.
Bear Claw latches from autoloc
Autoloc solenoids for door latches
Electric window motors