V-Band - Can you mate a machined flange to a Formed Sheet Metal?

[69lt4]

I have a formed sheet metal v-band flange on the exhaust side. I have switched engines and thus changed headers. Sold the old headers and left the v-band flange on it. Looking for a flange to put on my new headers and see machined flanges. I really don't want to cut the flange off the exhaust.
I would assume as long as the flange thickness where the v-band attaches is similar I would be ok. Just curious if anyone else has tried.
Thanks,
Kevin

[TheJDMan]

You need to weld these on your new header collectors.

http://www.summitracing.com/parts/vpe-1491s

and here are the clamps.

http://www.summitracing.com/parts/vpe-1491c

[69lt4]

Thanks Steve. Those are the machined flanges. I gather from your comment it should work with a sheet metal formed flange. Looking on the Clampco product page they show a machined flange to sheet metal formed flange configuration.
Kevin