bhcustomdesigns
01-05-2013, 07:13 PM
I have built a few of these aircleaners for customers cars in the past so I thought I would build a couple to sale and I wanted to post some pics up of the 2 I just built to see what everyone thought about them.These are built out of sheetmetal,this one is setup with a 3inch inlet for cold air intake the dimple holes in the side of the unit are not open to the inside this way all the air is forced in thru the inlet tube.The bottom can be removed to install a air filter inside the unit or you can put a cone style filter in the inlet tubehttps://static1.pt-content.com/images/pt/2013/01/HPIM2106_zpscead506a-1.jpghttps://static1.pt-content.com/images/pt/2013/01/HPIM2111_zpsd078c172-1.jpgThe next one is a oval style aircleaner and the dimple holes in the sides are open to the inside to take in air,the top is removable so you can install the airfilter.https://static1.pt-content.com/images/pt/2013/01/HPIM2116_zpsd583b062-1.jpghttps://static1.pt-content.com/images/pt/2013/01/HPIM2118_zps968ab76f-1.jpghttps://static1.pt-content.com/images/pt/2013/01/HPIM2123_zpsc25fd142-1.jpg I just wanted to get everybodies opinion on them.Thanks!