GMPP Controller kit

[XLexusTech]

Anyone have any experiences with these? Perhaps a PDF of the install instructions for me to review? Curious to know how much length they come with?
I have only seen one installed and everything (fuse/relay) panels were under the hood.. I want them more remote..

The kit I am am looking at specifically is...

http://media.gm.com/media/us/en/chevrolet/news.detail.html/content/Pages/news/us/en/2011/Nov/1101_lsa_controller.html

[joeelutz]

I have one in my LS7 powered 67 Camaro. I ran the harness through the firewall directly over top of the bell housing so it's hid and had just enough length to mount the ECU and fuse box in the glovebox location. I tune it with HP tuners. I don't like the corrugated wrap that comes on the harness so I changed it out for the braided wrap.
https://skydrive.live.com/?sc=photos&cid=7916ff1d087c7ab2#cid=7916FF1D087C7AB2&id=7916FF1D087C7AB2%212684&sc=photos

[joeelutz]

I have one in my LS7 powered 67 Camaro. I ran the harness through the firewall directly over top of the bell housing so it's hid and had just enough length to mount the ECU and fuse box in the glovebox location. I tune it with HP tuners. I don't like the corrugated wrap that comes on the harness so I changed it out for the braided wrap.
https://skydrive.live.com/?sc=photos&cid=7916ff1d087c7ab2#cid=7916FF1D087C7AB2&id=7916FF1D087C7AB2%212684&sc=photos

[XLexusTech]

Thanks Joe, how was the install? is it plug and play as advertised?

[joeelutz]

It was about the same as any other stand alone harness. All the sensors plug in. Then you have to wire switched power, constant power, ground, cooling fan and fuel pump. It has relays built in the fuse box for a single speed fan and fuel pump.