'67-'69 Camaro/ '69-'72 Nova Cage Nut Firewall Covers

[Brian - JCG]

Just had a bunch of these made. $70 a set. PM me with your orders or just follow the link and pick em up through our store!

They fit '67-'69 Camaro and '68-'72 Nova

Store Link - http://www.jcgcustoms.com/main.sc

691396913769138

Keep on the look out for more products in our store. Many new products for 2013! JCG Site (http://www.jcgcustoms.com/main.sc)

[GrabberGT]

Somebody asked on the other forum but still not sure on the answer. For us non GM/Camaro owners... Exactly what is it that these are covering up. a photo would be great.

[Brian - JCG]

Hey Chris,

There is a picture right above of it installed. These covers go over the hole in the firewall that give you access to the cage nuts. Which are the nuts used to bolt the front sub-frame down. These covers are a good looking machined pieces to clean it up a little.

I am also attaching a picture of a car we have in the yard without any covers on them..

69143

[GrabberGT]

NOW I understand. Thanks, I've been wondering about these covers for a while.

[Brian - JCG]

NOW I understand. Thanks, I've been wondering about these covers for a while.

No Problem! Sometimes all you have to do is ask..

[Brian - JCG]

Thanks for all the orders! Only have a few sets left. Once they are gone the next batch will not be in until February.. Only ones left are the polished. out of black anodized at the moment.

[KnightMare]

I want some black ones and it'll be around February when I'll need some. What about that A/C cover?

[Brian - JCG]

I want some black ones and it'll be around February when I'll need some. What about that A/C cover?

Sounds good. We do also sell the A/C Cover! I will start thread and post a link later today. Soon enough we should have all these items up on the store..

[Brian - JCG]

A/C - Heater Firewall Plate (https://www.pro-touring.com/showthread.php?95885-Universal-A-C-Heater-Line-Firewall-Plate&p=963259#post963259)

[TheBandit]

Those do look cool. Nice work. Reminds me of the Anvil carbon fiber firewall covers.

[Brian - JCG]

These are JCG's new product of the month.. We just got an order of these in and are ready to ship. For this entire month, we will knock $5 off per set for single orders and $7 off per set for orders over 3. PM me with your orders or you can go to our website. The sale price should go into effect on our site today. Thank You for your orders, Brian

[Brian - JCG]

These are no longer on sale, however we still have our ongoing 15% off sale for orders of 3 or more items..

https://www.pro-touring.com/showthread.php?96562-Jcg-sale!-*savings*

[Brian - JCG]

I have been getting many questions about mounting techniques for these on finished firewalls.. I will be creating a how-to very soon that will help with your installations. I will post it on here as well

[68 SuperRam]

The link above on the heater panel was not working - can you re-post the pics?

[novajess1972]

Sorry if I didn't see it or read thoroughly enough, but do you offer anything for Chevelles? 1972, to be specific.

[Brian - JCG]

I checked the link and the thread is still active with the a/c plate. You can also check it out at www.jcgcustoms.com


The link above on the heater panel was not working - can you re-post the pics?

Sorry, nothing yet. We have three Chevelles in the fabrication stage of the build going on right now in the shop, we should realisticly have some items ready for them in the next 2-3 months


Sorry if I didn't see it or read thoroughly enough, but do you offer anything for Chevelles? 1972, to be specific.

[Brian - JCG]

$76 shipped to the anywhere in the 48 Contiguous United States. PM, E-mail or Call.. You can also just go to the website and purchase through the store www.jcgcustoms.com

[daredvl22]

Still waiting for you to make some sets in black anodized :)

[Brian - JCG]

I know, sorry.. I am pretty sure I saw the boss send a few sets out to get coated with some other stuff like 2 months ago, but they definitely have not come back yet.


Still waiting for you to make some sets in black anodized :)

[Brian - JCG]

We got a few black anodized sets in today. Limited quantity, first come first serve. Thanks

https://static1.pt-content.com/images/pt/2013/08/B3D666F203214DE68B82B37DA0AA4E5E17330000-1.jpg

[daredvl22]

payment sent.

[Brian - JCG]

Thank you very much for the orders. We only have two set left of the black. Any takers? We do have a shelf full of the machined ones as well..

Thanks for your support, Brian

[firebob]

B,
On my firewall there is an outward(toward the engine comp) lip that surrounds the opening of the heater unit. Does that have to be knocked down flat for the new cover to fit flat against the firewall?

[Brian - JCG]

You are correct. That lip needs to be ground flush to allow the covers to sit flush on the firewall..


B,
On my firewall there is an outward(toward the engine comp) lip that surrounds the opening of the heater unit. Does that have to be knocked down flat for the new cover to fit flat against the firewall?

[Brian - JCG]

Stocked with lots of the raw covers and just got a few sets of black anodized in. PM me if you would like a set. Thank you guys for all your support

[Pro Pont]

Brian do you still have any Black anodized still available? Need one set.

[Brian - JCG]

I have 3 sets left. PM sent


Brian do you still have any Black anodized still available? Need one set.

[Brian - JCG]

It's that time of year again. The winter season is on the downslope and everybody is rushing to finish up their projects for those first good days and the car shows and races to come. We are offering free shipping when purchased through pro-touring.com. You must pm me or e-mail me directly for this offer. I am also willing to offer better pricing with the purchase of multiple items.

Thank you all for your support, Brian

[Brian - JCG]

To all who have purchased these, I would like to see some installed photos. I do sometimes get one from time to time in my e-mail, but not as many as I would like. So please if you have a moment post your pic or e-mail me them.

Thank you

[dcrider69]

Are these covers supposed to come with hardware, in particular the black?

[Brian - JCG]

No sir, hardware is not included with these. These are not a direct bolt on item. There is some fabrication that needs to be done and it can be mounted with different methods, so it is left up to the customer to decide how to finish it to tie into their specific build. If you would like to know how we install them I would be happy to share that information.


Are these covers supposed to come with hardware, in particular the black?

[icemanrd19]

B,
On my firewall there is an outward(toward the engine comp) lip that surrounds the opening of the heater unit. Does that have to be knocked down flat for the new cover to fit flat against the firewall?

Wish I would have seen this before buying them. Nice product though. Guess I will have a set for sale

[Perry M]

I know this an old thread but was wondering if you are still making these body mount covers. Your web site doesn't show any products, maybe it's broke. I was wondering if it's possible to machine a groove in the back to accommodate the lip so grinding on the finished firewall would not be necessary. Of course, I would need to get the grooving done myself but was wondering if your plates are thick enough at the groove location to accommodate this process. Hope this makes sense.