quick g-mod ?

[gen3bu]

does the g-mod locate the uca futher towards the rear to improve caster?
if not, why not? it makes sense to me.

does anyone know if the g-mod will work on a g-bobdy and/or 2wd s-10? i was thinking of doing the g-mod and reloacting it slightly rearward to improve the camber curve and add a little extra caster. only moving it rearward @ .250-.500". will that be enough to make a difference?

thanks
kevin

[Supercharged 86]

If you're talking about drilling new holes to mount the UCAs in a G-body, I don't think you'll have the room for it. I've wanted to, but the mount curves toward the bottom. If you end up making it work, let me know how it turns out. Moving it back and down would help.

[PRO TC]

the guldstrand mod on camaro does slightly move it to the rear. but the major gain is that it lowers the upper control arm by 3/4 of an inch. this helps make up for the spindle that is to short. and helps with negative camber gain when cornering .

pro tc

[gen3bu]

thanks
i will let you know.
i think the sonoma is first on the chopping block though.

kevin