long day ahead....

[blakes72x]

this is what i'm doing today :seizure:

67212

well today and tonight possibly tomorrow if the mobile welder can't get here today then its open headers to the exhaust shop then to the alignment shop then some :wrc:

stoked about the tires they are michelin pilot super sports i got the whole set for 200 bucks the headers are doug thorley tri-y's i got for 100 bucks lol freakin love craigslist

rest of the stuff is ridetech stage 2 coilover set up and wheels are centerline lazers

[blakes72x]

if anyone is bored in san diego today and wants to lend a hand come on over about to go stock up the ice chest :cheers:

[soloracerSD]

You got a week and a half to finish it Blake..Then you can be autocrossing with the SDR-SCCA and Good Guys autocross.

[formula350]

Where in sd??

[bret]

Will you be at the Del Mar Goodguys show in a couple weeks? LOVE to see the car! Maybe we can do some autocross tuning...

[mild2wildpaintngraphics]

Will you be at the Del Mar Goodguys show in a couple weeks? LOVE to see the car! Maybe we can do some autocross tuning...

There's that awesome Ridetech service again!!

[srh3trinity]

That looks like a fun day ahead. I have my Ridetech setup in boxes downstairs and I can't wait to get my RT coilovers and Scott Mock subframe in the coming weeks. Make sure you document it well.

[blakes72x]

You got a week and a half to finish it Blake..Then you can be autocrossing with the SDR-SCCA and Good Guys autocross.

lol i'm trying i hit a wall though :scared:

wheels don't fit they run into the outter tierods and thats on stock spindles theres no way they will clear the drop spindles still don't have my disc brakes for my drop spindles so its looking like i'm going to need some different wheels against my better judgement i bought these cause i found a great deal on them on lat-g but they just aren't going to work up front plus monies tight so i gotta unload these before i can order new ones

either that or save up for the tru-turn now


Will you be at the Del Mar Goodguys show in a couple weeks? LOVE to see the car! Maybe we can do some autocross tuning...

ill be there either with or without the car

[Kenova]

Will you be at the Del Mar Goodguys show in a couple weeks? LOVE to see the car! Maybe we can do some autocross tuning...

:idea:
Bret, how about writing a book on tuning for those of us that just can't make it?:candle:

Ken

[MonzaRacer]

Or try a set of these. Friend has a street strip truck with a set of either the thinnest or one step up and he run slicks with about 600 hp and 10 in wheels tucked in car, hooks and goes down track good. He used one set, then pulled them and had them stress analysed, no issues, well built and plenty stout and he ran some autocross's somewhere before too.
http://www.ezaccessory.com/Wheel_Adapter_5_Lug_4_75_To_5_Lug_4_75_p/5475-5475c.htm

also what sizes are your wheels might know of a buyer.

[soloracerSD]

Blake have you been to Qualcomm stadium yet.. To check out our SDR SCCA autocross... You know my thread right "San Diego Autocross" next event Nov 18 a week before Good Guys.

[blakes72x]

Blake have you been to Qualcomm stadium yet.. To check out our SDR SCCA autocross... You know my thread right "San Diego Autocross" next event Nov 18 a week before Good Guys.
nope i havn't been yet i end up working almost every time theres an event


Or try a set of these. Friend has a street strip truck with a set of either the thinnest or one step up and he run slicks with about 600 hp and 10 in wheels tucked in car, hooks and goes down track good. He used one set, then pulled them and had them stress analysed, no issues, well built and plenty stout and he ran some autocross's somewhere before too.
http://www.ezaccessory.com/Wheel_Adapter_5_Lug_4_75_To_5_Lug_4_75_p/5475-5475c.htm

also what sizes are your wheels might know of a buyer.

wheels are centerline lazers
17x8 front 5.5in bs
17x9.5 rear 5.5in bs

[SR71]

looks like you need a tru-turn upgrade kit. you already have the spindles, so it's $650 instead of $1000.

in the end, it's only money.

on second thought......

hold on. I would ask Brett if anyone has tried the tru-turn with the thorley tri-y's yet. they don't look like they sweep back enough to clear the drag link bracket.

[carguy502]

I am running Doug Thorley TriYs on my 1969 Nova with a true turn kit and I have no interference. In my experience, Camaros are nearly identical to third gen Novas. I think my headers were even meant for a 67-69 Camaro. Good luck!

Don