2nd gen Firebird/TA Pro-Touring Parts (VBP Suspension and YO wheels)

[tazimm]

Hello,

These parts were all selected for a 1977 TransAm. I will ship at the buyers expense, otherwise come pick them up in Amelia, OH (near Cincinnati, OH) or PM me with your location as I tend to travel around the midwest.

Front Suspension $2500

Vette Brake Products mono-leaf conversion

http://www.superchevy.com/technical/chassis/suspension_steering/sucp_0102_1970_camaro_suspension

Front mono leaf conversion (new VBP upper and lower control arms)
Sub-Frame blasted and powder coated
Bilstien shocks
Moog tie rod ends
Billet tie rod sleeves
New close ratio (iroc) steering box 12.7:1
Flaming River u-joint kit
Wilwood 4 piston caliper front brakes (140-8582-DR)
Energy Suspension motor mounts
New PTFB solid body mounts
New PTFB sub frame connectors

https://static1.pt-content.com/images/pt/2012/09/frame-1.jpg
https://static1.pt-content.com/images/pt/2012/09/vbp1-1.jpg
https://static1.pt-content.com/images/pt/2012/09/P1000710-1.jpg
https://static1.pt-content.com/images/pt/2012/09/P1000682-1.jpg
https://static1.pt-content.com/images/pt/2012/09/brakes-1.jpg

Rear Suspension $500
Rear VBP composite leaf springs with new hardware
Bilstien shocks

https://static1.pt-content.com/images/pt/2012/09/P1000672-1.jpg

Wheels and Tires $1000
4 - New YearOne 17" snowflakes (black inside the snowflakes)
4 - New Nitto 275/40 r17 (unmounted)

https://static1.pt-content.com/images/pt/2012/09/P1000677-1.jpg

Thanks - Scott

[73RSZ28]

If you would be interested in spliting up some stuff, I would be interested in the steering components. Tie rods, steering box, sleeves, etc.

[qnitro]

What are the width on the rims??

[skreaminshicken78]

Pm'ed

[JEFFTATE]

I like that monoleaf conversion , I've never seen that before .
Good luck with the sale ..

[cali-life]

how much for the rims shipped to 95693

[tazimm]

These are 17x9...

Thanks!

[tazimm]

Sale pending on the Rims/Tires, and the Steering components... I will update the listing as they go...

Thanks!!!

[geberhard]

second in line on tires and wheels if first deal falls through, thanks! Gui

[aronhk_md]

I have the VBP suspension setup too that I just installed on my 73 turbo trans am over the winter. Its almost ready for the road but not quite yet. There are 1 or 2 other people here who have the setup, or had it. Also there are a couple of magazine articles from the 80's that featured it. Its not on the VBP website, but they still have it and sell it. The owner just doesnt think there is a demand for it, but with the interest lately in 2nd gens I think he is wrong.

[ryeguy2006a]

Let me know about the engine mounts.

[abowman]

I would be interested in a a price for the sub-fram connectors, body mounts, and rear suspension pieces if you're willing to consider selling just those parts. I would also be interested in the steering components if that sale were to fall through.

I tried sending a PM, but not sure it worked. Sorry if this is a double message.

Thanks,

ab

[cali-life]

i called second i tires first

[vegnasty]

What is the backspacing on those wheels?

[tazimm]

The subframe and rear suspension stuff is on Ebay.

starting at $300 for the rear and $1000 for the subframe. At those prices this stuff is a steal!!!

http://www.ebay.com/itm/271068537322?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

http://www.ebay.com/itm/271068552137?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

Thanks...
Scott

[ryeguy2006a]

I added the rear suspension to my watch list.