SBC engine and top end parts for sale

[Flash68]

Engine plans changed direction so these parts are up for sale. Local sale preferred especially on the big stuff of course. Will entertain shipping scenarios though.

PBM iron race block, 350 mains, 4.155 bore, .904 bushed lifter bores, splayed caps on all 5 mains, bored cam tunnel to BBC cam size of 50mm. machine work boring and diamond hone done by Watson Racing in Concord, CA

$1000 of fresh top notch machining. Asking $2000.

https://static1.pt-content.com/images/pt/2012/08/photo17-1.jpg

https://static1.pt-content.com/images/pt/2012/08/photo26-1.jpg

https://static1.pt-content.com/images/pt/2012/08/photo20-1.jpg

Callies Compstar 6.0" rods, small journal (2.00), 586 grams

Asking $525.

https://static1.pt-content.com/images/pt/2012/08/photo_00410-1.jpg

Callies Comet Lightweight 3.5625 stroke crank (43 lbs)

Asking $900.

https://static1.pt-content.com/images/pt/2012/08/DSCF4094-1.jpg

GM 18 degree "363" heads, 47.5cc, 2.1x intake valves and 1.6x exhaust. Comes with springs but Watson encouraged me to get new PAC or similar springs.

Lift / Intake / Exhaust
.100 75 53
.200 149 106
.300 226 158
.400 264 212
.500 326 234
.600 358 247
.700 369 255
.800 373 258
.900 366 260
.975 366 262

https://static1.pt-content.com/images/pt/2012/08/DSCF4011-1.jpg

Edelbrock 2922 intake for 18 degree heads, ported extensively by Wilson Manifolds

https://static1.pt-content.com/images/pt/2012/08/DSCF4063-1.jpg

Jesel 1.7 intake/1.6 exhaust shaft rockers, Watson says a few of them need rebuilding but in overall good condition.

https://static1.pt-content.com/images/pt/2012/08/DSCF4016-1.jpg

ARP 18 degree head stud kit

Top end kit (heads, intake, Jesel rockers, head studs) = $2200

Morel/Roush Yates .903 solid roller lifter, .180 intake offset.

$300

https://static1.pt-content.com/images/pt/2012/08/DSCF3997-1.jpg

Stainless 18 degree stepped headers with merge collectors, 1-3/4" to 1-7/8" to 3-1/2" collectors, a few dings but came out of 8 second 1st Camaro with 800+ hp 421.

$375

https://static1.pt-content.com/images/pt/2012/08/5Gb5Ha5Jd3G43Fa3J9bcm040cb436cfe91d25-1.jpg
Parts are in the east bay of Bay Area currently. Email me at dwgordon at gmail if interested.

:cheers:

[Flash68]

Forgot about headers too. Info added to first post.

[Flash68]

$4500 for everything minus headers.

Or make offers on anything. Gotta go!

[Flash68]

Headers, crank and rods sold.

Block can be had for $1700.

Top end for $2200.

[Pro Stock]

Who built the headers and do they bolt directly to the 18* heads or do the use ex port plates, will they fit a stick shift car?

[Flash68]

Headers, crank and rods sold.



Who built the headers and do they bolt directly to the 18* heads or do the use ex port plates, will they fit a stick shift car?

Sorry, headers are sold.