walis
07-23-2012, 11:45 AM
got me antremec tko 600 and a, 383 with trickflow alu 23 degree heads hedman shorty headers a 1407 edelbrock carb comp cams xr282hr
intake ,510 ex ,,520 duraton at 50 282/288 carb is rod 1455 pr jet 1434 sec jet 1434 step up spring orange pump cluster ,43
now to my problem i have a stumble when i floor the pedal,, go a little easy no problem was worse before the change of rods in the carb
when i get up to 2200 (when the cam suppose to kick in everything is great a slight hesitation but nothing i cant live with
but the stumble makes me maaad :crying: i think u guys can help me,,, and oh i forgot got me an msd streetfire hei too (kinda strange i have a gap between the cam and the
hei i can move the rotor some 4 mm back and forth like the cam and distributor gear is worn but they are not! (xcus my crappy american ) micke
intake ,510 ex ,,520 duraton at 50 282/288 carb is rod 1455 pr jet 1434 sec jet 1434 step up spring orange pump cluster ,43
now to my problem i have a stumble when i floor the pedal,, go a little easy no problem was worse before the change of rods in the carb
when i get up to 2200 (when the cam suppose to kick in everything is great a slight hesitation but nothing i cant live with
but the stumble makes me maaad :crying: i think u guys can help me,,, and oh i forgot got me an msd streetfire hei too (kinda strange i have a gap between the cam and the
hei i can move the rotor some 4 mm back and forth like the cam and distributor gear is worn but they are not! (xcus my crappy american ) micke