vande596
07-09-2012, 05:06 AM
Hey Guys,
I am selling a swap setup out of a 1999 z28 6-speed Camaro. This is pretty much eveything you need to swap in this dash into another vehicle of you choosing. parts are charcoal in color, and this is what is included:
- Dash (good condition. One crack smaller than a quarter right above the word "AIR BAG" on passenger air bag cover.)
- Steering wheel panel (piece that goes below the steering wheel.)
- radio bezel
- air vent bezel (Passenger Side)
- air vent bezel (Driver side)
- gauge cluster
- Dash pad (great shape. no cracks or anything)
- center console( again... it's for a manual trans.)
- center console lid.
- shifter boot (retainer ring is broken and small hole, but can be replaced.)
- The trans tunnel(yes... i cut the trans tunnel out of the car to keep the brackets. Even has ebrake bracket on underside.)
- metal dash ( the part of the car that the dash pad and actual dash mount to)
- more small pieces i probably forgot.
- more parts i probably forgot.
I was going to use all this to mod a 69 camaro, but I am going to stay with stock interior.
$450 for everything. Not sure how to really price everything together/the parts i cut out. Sorry I am not willing to split up at this time. And this is all i have for interior. Seats, carpet, and plastics are all gone. I am located a little west/north west of Lansing, MI in Grand Ledge.
If interested please PM so i know you are a member here I can also send you a part specific pic if needed. Thanks!
61805618066180761808
I am selling a swap setup out of a 1999 z28 6-speed Camaro. This is pretty much eveything you need to swap in this dash into another vehicle of you choosing. parts are charcoal in color, and this is what is included:
- Dash (good condition. One crack smaller than a quarter right above the word "AIR BAG" on passenger air bag cover.)
- Steering wheel panel (piece that goes below the steering wheel.)
- radio bezel
- air vent bezel (Passenger Side)
- air vent bezel (Driver side)
- gauge cluster
- Dash pad (great shape. no cracks or anything)
- center console( again... it's for a manual trans.)
- center console lid.
- shifter boot (retainer ring is broken and small hole, but can be replaced.)
- The trans tunnel(yes... i cut the trans tunnel out of the car to keep the brackets. Even has ebrake bracket on underside.)
- metal dash ( the part of the car that the dash pad and actual dash mount to)
- more small pieces i probably forgot.
- more parts i probably forgot.
I was going to use all this to mod a 69 camaro, but I am going to stay with stock interior.
$450 for everything. Not sure how to really price everything together/the parts i cut out. Sorry I am not willing to split up at this time. And this is all i have for interior. Seats, carpet, and plastics are all gone. I am located a little west/north west of Lansing, MI in Grand Ledge.
If interested please PM so i know you are a member here I can also send you a part specific pic if needed. Thanks!
61805618066180761808