PDA

View Full Version : 500 inch Mopar Wedge Stroker Motor from Strope's Hammer



reedster
06-17-2012, 10:51 PM
Motor is SOLD

The motor is based on an early Mopar 400 CI Wedge low deck block with aftermarket steel caps and a 4340 stroker crank and Mopar performance aluminum heads.

Mopar Performance Forged Crankshaft 4340 Steel
Mopar Performance Full Roller Valve Train
Mopar Performance Stage VI Aluminum Heads

The motor comes complete with water pump, alternator, AC compressor, power steering, all the drive accessories and pulleys. It DOES NOT have the fast ECU injectors, throttle body, or Supercharger.

This motor was built by Nelson Racing Engines of Chatsworth, CA for Strope's Hammer.

Here are some links of it on the dyno making 750HP (with the Supercharger)
http://www.nelsonracingengines.com/videos/on-the-dyno/NRE-Blown-500cid-Mopar.html

And another running in the car:
http://www.nelsonracingengines.com/videos/test-drive/1970-PureVision-NRE.html

The motor was only in the car for about 1000 miles before being replaced with a Hemi. It's a great motor at a great price. Cost thousands more to build.

Asking $4000 ---- SOLD

60919