Baer brakes and some Budnik wheels

[Crafty One]

Complete Baer brake set up. Kit was purchased to mimic the Redline Oil Chevelle... Everything you need to bolt on and go if you have a 9" rear. If not the proper brackets can be purchased thru Baer to bolt it to a 10 or 12 bolt. Also included is a "PAIR" of Budnik Famosa 17x8 Wheels with BFG 255/45's.... again these were purchased to mimic the offset and tire size on the Redline Oil Chevelle.... Everything is in like new condition, cause it was never installed....Now for the bad part... These parts have been in storage for over 10 years. The wheels could use a good professional polish, and the brakes have some surface spots here and there.

Asking $1350 for the brakes, and 300 for the wheels and tires, picked-up or meeting me within 2 hours of Pensacola, FL... I would prefer not to have to ship these.

Will consider partial trades for front coil over kit, and tubular suspension components for 99-04 mustang. Also looking for a nice set of 19x12 rear wheels with small ford pattern.

Sorry No PayPal or M.O. on this transaction.... Will accept cashieres check, or personal check (there will be a holding time before they would ship).... Pick-up or meeting will be cash only...

Part #'s for Baer

FROC4GA101555HN TRACK 64-72 W/B SP
REAC4GA106005DN 64-72 BRING IN HSING SY
UPG0ROT12004SDZ SLOT/DRILL/ZINC ST set of 4 1pc rotors
HYDZOZZ17700XXX Proportioning valve

Extra info I fogot....

Spindles are B body spindles....
The parts bag in the pic includes the proportioning valve, braided lines, lugnuts, and all the rest of the hardware needed for the install...


If you have any specific questions, or would like to speak to me directly, PM me for my phone number...

Thanks
Ryan

[67goatman455]

part numbers for the brakes? separate wheels from brakes?

[Crafty One]

I might consider it.... I have Pics of the order sheets and intall directions on my phone... PM me your number and I can text them over .....

[pharmd]

Do you mind to post the PN's?

[Crafty One]

Not at all.... It will be late tomarrow before I can get the pics up with all the numbers

[67goatman455]

posting just the part numbers would be helpful. not so much the pictures of the order sheets

[Crafty One]

posting just the part numbers would be helpful. not so much the pictures of the order sheets

Was not even really thinking about doing it that way.... most of the time pictures are whats important...


See first post for some part numbers...

[ohiohammer]

I'm interesred in the brakes, please call Carlton at 614-725-6119. Thanks!

[Crafty One]

Back to the top....

[69bluecoupe]

Have the brakes been sold

[Crafty One]

Not yet... There has been alot of interest, just no definite buyer....

[69bluecoupe]

Give me a call 404-759-8193

[67z28]

How much for the wheels & tires?

[Crafty One]

Send me an offer via PM and we will talk from there....

[Crafty One]

Back to the top... Made a small price change.... Did a bunch of research, and I hate to say.... My price was kind of high....

[Crafty One]

Last chance.... Just going to put them back into storage at the end of next week....

[Steve68]

what the back spacing on the wheels?????

[Crafty One]

Back spacing is 4.375"

[Steve68]

Thanks, Not enough for what I want,

[Chrisbequick]

Back spacing is 4.375"

If you will ship the wheels/tires I will cover shipping plus a little for your time.

[Crafty One]

back up top, just for the heck of it....

[Crafty One]

Pulled these out of storage today. Don't have to sell but trying to get funds for another project. See top for new prices. Don't be affraid to make me an offer.