DarkoNova
04-12-2012, 05:54 PM
Just rebuilt my 350...er, 357 now. Performer RPM heads, Performer RPM Air Gap, 10.5:1 compression, XE274H cam, MSD Pro Billet with Blaster 2 coil.
I just got some AC Delco plugs from Autozone (don't remember which ones, I'll see if I can find the receipt), but a couple of the spark plug wires are ridiculously close to header tubes. One of them actually ended up touching the header and melting a little. So I was planning on getting some of those Accel shorty spark plugs. Just not sure if I want resistor plugs or non-resistor plugs. I obviously need to get new plug wires, too, since aside from the melted boot, they're at least a good 5 years old. I'm probably going to just get the MSD Street Fire universal wires from Autozone so I can make them as long/short as I need.
I just got some AC Delco plugs from Autozone (don't remember which ones, I'll see if I can find the receipt), but a couple of the spark plug wires are ridiculously close to header tubes. One of them actually ended up touching the header and melting a little. So I was planning on getting some of those Accel shorty spark plugs. Just not sure if I want resistor plugs or non-resistor plugs. I obviously need to get new plug wires, too, since aside from the melted boot, they're at least a good 5 years old. I'm probably going to just get the MSD Street Fire universal wires from Autozone so I can make them as long/short as I need.