LS6 intake

[68lovebuzz]

Looking for an LS6 intake manifold. Would prefer it is complete with sensor and gasket and bolts. I have a fuel rail for it with injectors already. I have a corvette Fly by wire TB but would like to get a cable TB for easier set up. Also, the crossover kit for cooling is needed. Let me know what you might have!

Thanks much,

Brian :smoke:

[GeoffP]

Why not go with an LS2 intake and use an adapter for the Corvette throttle body rather than pay the LS6 intake premium? The HP difference between the LS2 and LS6 intake is negligible so it may be worth it to save you some coin.

[68lovebuzz]

This just goes to show you how much I know about LS stuff. Im pretty new to the LS world but eager to learn. I was told to go with the LS6 because there is a HP and midrange torque difference that my LS6 would notice. ( I bought an LS6 w/o an intake) I will consider that option. Thanks Geoff!

Brian

[dontlifttoshift]

LS6 = 3 bolt throttle body

LS2 = 4 bolt throttle body

Just an FYI

[GeoffP]

Yep that's why I suggested the adapter to keep cost down. Then when you can afford to swap to the proper 4 bolt throttle body you'll get that much better performance. :)

[68lovebuzz]

Thanks Gents

- Brian

[jwcarguy]

Brian,

I have a couple LS6 intake setups (with rails & injectors, sensor)
I haven't listed them yet, since I will be selling a complete LS1 engine soon

I would consider selling it bare also
I will post some pics soon

thanks, Jeff [email protected]

[jwcarguy]

pics

[coolwelder62]

My Son Kevin is needing an intake for his LS6. PM sent.Scott M.

[jwcarguy]

My Son Kevin is needing an intake for his LS6. PM sent.Scott M.

email sent

Thanks, Jeff

[jwcarguy]

bare one is available now also

[vande596]

PM sent on bare intake.

[jwcarguy]

PM sent on bare intake.


pm replied

thanks, Jeff