PDA

View Full Version : 1st Gen Camaro and Misc parts



DEIGuy38
03-28-2012, 09:21 PM
DSE offset shackles part # 040901 $ 250.00 Firm

Landrum Leaf Springs 200 lb part # 21-342SPA 5" Arch Lot# 29049 I was told if you take the 2nd spring from the bottow out it would ba a 175 lb spring $ 250.00 set

Energy Suspension leaf spring bushings part # 3.2102G $ 40.00

AFCO lower shocks plates part # AFC-20249, AFC-20250 $ 50.00 set SOLD

67 Camaro full quarter panels w/sail panel and door jamb left & right (could use on 68 cut marker light and jamb vent holes) $ 325.00 each SOLD

1998 Camaro LS A/C Compressor $ 25.00 Hoses and Belt SOLD

LS6 Fly By Wire Throttle Body $ 40.00 SOLD

LS Camaro/Firebird Brake Boosters (2) $ 20.00 each SOLD

Power Steering Box, #5691676, 3 Turns Lock to Lock with Pitman Arm # 3989477 GMT39B $ 35.00

Stock 1968 Camaro Drum Brake Hubs, $ 35.00 set

Stock 1968 Camaro AC Suitcase $ 60.00 SOLD

Stainless Steel Fuel Line from SBC Pump to Q Jet Carb $ 20.00

WILL NOT SHIP QUARTER PANELS, I will be a the Reno swap meet at ARCO Arena on 4/22/12
If you don't like the price make me a resonable offer
Prices DO NOT include shipping, buyer pays shipping.
Located in Lincoln, Ca.95648, close to the Sacramento, Ca. Area.

DEIGuy38
04-02-2012, 07:43 PM
Bump to the top

DarkoNova
04-02-2012, 09:32 PM
Do you have pics of the fuel line? Interested if it will work with my Edelbrock.

Also, what was the steering box out of? Your 68? Price shipped to 92407, please. Thanks!

DEIGuy38
04-03-2012, 08:17 PM
Here you go Matt. The fuel line was on a factory style SBC mechanical pump and went to a stock Q-jet. If the inlet location is in the same place as the Q-jet I think it would work. I cant remember if the box is off of my Camaro or the Nova subframe I bought. I will check shipping and PM. What part of CA are you in Im in Lincoln maybe we could work something out instead of shipping. I will be at RENO swapmeet at Sacramento on the 22nd. 5777557776

DarkoNova
04-04-2012, 09:31 PM
Hmm, what kind of fuel pump did you have? Mine just has a regular barbed hose fitting for pushing a hose on and using a clamp...not sure if that hose will work for me.

DEIGuy38
04-08-2012, 09:02 PM
Matt,

It was just a stock replacement mechanical type. I believe the barbed fitting and hose are just a different way to achieve the same result.

Few other parts sold Updated

DEIGuy38
04-17-2012, 06:20 PM
Updated for parts sold

69cortezsilver
04-17-2012, 06:43 PM
power steering box still avail?

DEIGuy38
04-19-2012, 08:26 PM
Dark Nova is supposed to send paypal this weekend. He has 1st shot, if he backs out I will let you know.

LONE*STAR
04-19-2012, 09:07 PM
Whats up Guy! Are you parting out the project?

James

DEIGuy38
04-21-2012, 07:37 AM
No way James, just getting rid of some spare parts and the rear leaf springs and shackles to get some type of 4 link set up set up. But I am getting rid of the El Camino SS. You will will have to swing by in you bird some time so I can check it out.

69cortezsilver
04-22-2012, 07:27 PM
steering box gone then?

DEIGuy38
04-24-2012, 08:20 PM
Cortez, I still have the box, sent a PM. List updated for parts sold it was a good weekend at the swapmeet. Some prices lowered

LONE*STAR
04-28-2012, 08:08 AM
I'll plan to make it by next weekend after I get this Sparco Chrono driver seat in. Pm me your phone number and I'll give you a shout.

1974nova
06-02-2013, 09:28 PM
Here you go Matt. The fuel line was on a factory style SBC mechanical pump and went to a stock Q-jet. If the inlet location is in the same place as the Q-jet I think it would work. I cant remember if the box is off of my Camaro or the Nova subframe I bought. I will check shipping and PM. What part of CA are you in Im in Lincoln maybe we could work something out instead of shipping. I will be at RENO swapmeet at Sacramento on the 22nd. 5777557776 If this is for a rear steer I would like to buy it.

1974nova
06-02-2013, 09:33 PM
let me know. thanks great site. Thanks

DEIGuy38
06-03-2013, 08:34 PM
Yes it is for a rear steer