69 camaro ls1vortech swap

[turbo corey]

name : corey stewart
were i live : springhill fl 34606
my cell: pm me
my email: [email protected]

i dont know if i am doing it right to be posting on here but here it is and sorry if i am doing it wrong



i have a
ls1 engine with a nice cam and vortech superchager Vortech V9 g-trim headunit, 2.7" reichard racing pulley (6 rib), custom 3/4" aluminum mounting bracketry with ARP mounting studs/hardware,new PRWs high flow aluminum water pump Polished Finish and a new chrome vintage air a/c comp with ls6 intake and tb.
ls1 BullDawg MuscleCars mount kit new for a (t56 tranny)
ls1 BullDawg MuscleCars headers 1 7/8
New Edelbrock polished aluminum coil covers

i have the pcm


i will sell all for $6500 obo
will trade for a bbc or a nice set of wheels with tires looking for 19x10 and 20x12 or 12.5

https://static1.pt-content.com/images/pt/2012/03/photo5-1.jpg
https://static1.pt-content.com/images/pt/2012/03/photo2-1.jpg
https://static1.pt-content.com/images/pt/2012/03/photo5-2.jpg
https://static1.pt-content.com/images/pt/2012/03/photo4-1.jpg

[69projectKAOS]

is that a 2jz i see in the second picture on a engine stand in the back of the shot?? lol good luck with the sale, seems like a killer deal!!. -Dom

[turbo corey]

Yes I had 3 supras and now have one . I just sold my r34 gtr to

[jwcarguy]

Corey

I have a 69' 427 (#512 block) in my 68' now and was looking to sell that and go with a LS swap
let me know if that is something you're interested in and i can get you pics and more info on it

I am in Las Vegas
email : [email protected]

thanks, Jeff

[turbo corey]

you got mail ^^^^^^^^^^^

[turbo corey]

new price 6500 obo

[jwcarguy]

new price 6500 obo

Corey,
I sent you this info and pics... any feedback??

1969 Corvette 427 / 390 hp engine

Block: # 3963512 .(030 with forged TRW pistons 10.5:1 cr w/ heads)
cast date: K 4 8
Front pad stamping: TI 20LM 19S736862

Crank: #6223 ( .010 / .010) factory Forged iron, cross-drilled & polished

Heads: # 353049 (late 73' cast iron, large oval ports, valves opened up to 2.19 intake 1.88 exhaust Manely Race-flo valves and springs ,stock rockers) upgraded 7/16" screw in rocker studs

Cam: Crane #103052 dur: 272 lift 515" Hyd. flat tappet, Crane lifters, double roller timing chain set, hi-perf pushrods

Intake: Edelbrock Performer RPM

Carb / fuel : Barry Grant Speed Demon/ Claw 750cfm dbl. pump, mech. sec. with stainless steel braided duel feed line , AN fittings,& filter, VDO fuel press gauge, Holley mech 110gph fuel pump

Hei dist.: with upgraded Pertronix Flame Thrower 50,000 volt coil and module, MSD spark plug wires

Alternator: new late model heavy duty 140 amp

Exhaust: Doug Thorley #313 1 3/4" primary, 4 into 1 , full length, chrome ( some scratches on bottom)

Water pump: new aftermarket

oil system: Melling performance hi- volume oil pump, Milodon oil pan / pickup

Pullies and bracketry: stock GM parts

starter & flexplate: new HD sfi 168 tooth and new HD starter

chrome valve covers, breathers, timing chain cover, water neck and 14" air flter housing with K&N 3" element

I do have a brand new Sanden 134a A/C compressor, with new in box Alan Grove big block a/c compressor mounting bracket kit for the Sanden ( I had powder coated black) that has never been installed

Runs great only 6,000 miles since rebuild


I need more specifics on yours

Thanks, Jeff

[turbo corey]

yes i got it sorry about that

[xtremevci]

Hello , How much horsepower is the engine making with the charger?, and how many pounds of boost?

[turbo corey]

i just put the charger on it so i dont no how much hp it makes .

[turbo corey]

the charger will do 650hp

[xtremevci]

will you be willing to ship the engine?.

[turbo corey]

yes if you pay for it and set it all up

[69projectKAOS]

do you have any 2jz parts for sale by any chance? :)

[turbo corey]

pm me


and the engine sold locker her up thanks

[elitecustombody]

do you have any 2jz parts for sale by any chance? :)

What 2JZ parts are you looking for? I had 8 MKIV Supras ,down to 3 right now.