1969 Camaro Pro Touring LS2 T56 Vintage Air

[talwell]

1969 Camaro Pro Touring
Lemans Blue w. Black Z-28 Stripes
LS2 Motor w. 12k Miles - 520hp
Speed Inc Stage 5 Custom Grind Cam & Valvetrain
2002 Trans Am T56 w. LS7 Clutch
(4) Wheel Wilwood Brakes w. E Brake
Tubular Upper & Lower Front Control Arms
QA1 Front Coilovers
Lowered 1.5" Front 2" Rear
Dynatech Headers & Flowmaster Exhaust
Vintage Air & Heat
Dakota Digital VHX Digital Gauges
Rushfurth Livewire Polished & Forged Wheels - 18x8 Fronts & 20x11 Rears

Fully Restored Body - All Required Panels Replaced
Brand New Tinted Glass
Brand New Black Interior w. Tilt Column
Every Interior & Exterior Part Replaced - 100% Brand New
Built From Shell - Extensive Restoration
No Miles on Restoration or Build - Just Completed

Dyno Tuned @ 450rwhp by Speed Inc.

NEW PRICE: Ready to Go - $65k

Worldwide Shipping Available

Call me @ 646-330-2772 or PM me for further details or questions.

[crazyv6]

Todd,
The wheel combo and stance is perfect!
Tim

[Blevinator]

What mods were made to get 520 hp?

[talwell]

What mods were made to get 520 hp?

Exhaust, heads, cam, intake and tune. It is a stock bottom end LS2 with all the work done in the top end.

Here is a link to the dyno run after many tuning runs.

http://www.youtube.com/watch?v=XuBOGw-sPxA

[Chev67]

What size wheels and tires front and Back? Looks awesome!!!

[Blevinator]

Are those Kwik Performance brackets? If so, which kit?

[Rick D]

Very nice looking car, how come you are selling it. Now is the time to start driving it! Is it still over at Speed?

[talwell]

Are those Kwik Performance brackets? If so, which kit?

This is the GEN 4 Vintage Air LS kit - if you need the part numbers I could get for you. Personally I would prefer a kit that mounts the compressor down low but I know that one is not available through Vintage Air.

On the next one I think we are going to try and fabricate our own mounts to get the compressor low and out of view. It will clean up the top of the motor.

[talwell]

Very nice looking car, how come you are selling it. Now is the time to start driving it! Is it still over at Speed?

The cars are built as a hobby and then I sell them. I enjoy getting them restored, built and then into a completed project.

No worries - I have a LSx 427 Twin Turbo 69 Camaro that we are building for myself. For now, the 700hp 2010 Camaro will be the cruiser.

[76712]

you ever think of going to a 12 bolt?

[talwell]

you ever think of going to a 12 bolt?

For street driving with limited traction the 10 bolt is fine but the 12 bolt would be a great upgrade.

[6D9 Matt]

Sharp car man! GLWS

[talwell]

Still available - someone grab it before it goes to the broker.

I will have a blue one with black leather interior available in a few weeks.

Here is a quick picture of that car. Motor and trans in - finishing up as we speak.

[talwell]

Still available. Blk car is almost done and black convertible currently being assembled. Convertible is getting 525hp LS2, T56 6 Speed, leather interior, 3:73 posi, 4 wheel discs, lowered with coil overs and tubular control arms.

I can build a car to your specs - if you are interested just PM me your contact information.

5784157840

[jwad355]

Is this silver one finished yet? got a price and specs you could post up, thanks

[talwell]

Is this silver one finished yet? got a price and specs you could post up, thanks

Car is almost complete. This car is being built with a mildly built LS1 & T56 6 speed. Will be in the 400hp range once we get it on the dyno.

Car has (4) wheel Wilwood discs, 3:73 posi rear, upper and lower tubular control arms, QA1 coilovers, forged billet aluminum Centerline wheels and lowered in front & rear.

Interior is custom wrapped leather seats with double red stitching, Dakota Digital VHX dash, full Dynamat, retro sound system w. Ipod interface and Gen 5 Vintage Air. Aftermarket billet steering wheel with comfort grip & tilt column.

Car is 100% rotisserie restored. Every single part of the car is brand new - glass, trim, interior, wiring, etc. Car is painted 2010 Viper silver w. 80% black undercarriage & firewall. We smoothed the firewall in the heater box area.

Price on the car is $67.5k - we can still customize any portion of the car to suit your needs. We also have taken several orders to build cars to spec.

Cars can be shipped worldwide - we can arrange enclosed transportation to your doorstep.

[talwell]

Here is a quick pic of the motor installed in the LS1 6 speed car.

Motor has aftermarket aluminum valve covers and relocated coil packs. All front accessories are brand new Corvette style for easy fitment and replacement in future.

58600

[talwell]

588235882458825588265882758828

[MK69RSSS]

Is blue car sold?

[talwell]

Is blue car sold?

Blue one is at brokers. Unfortunately once the broker gets the car we cannot sell for the same price due to thier commission.

[talwell]

Next available car in production is another 69 convertible. This car is Boyd's Red w. black leather interior and black cloth top. Drivetrain is mildly worked (500hp +) LS2 backed by T56 6 speed, 8.5" 3:73 posi, 4 wheel disc brakes, QA1 coilovers w. tubular upper and lowers. Some more notable specs on the car is keyless entry & keyless push button start, Dakota Digital VHX dash, restro sound system, forged wheels, 100% brand new interior and trim.

This car should be available in about 2-3 months. For anyone interested - we can customize the car to suit your specs. At this time the only thing we cannot change is the exterior color. If you have another drivetrain in mind or suspension choice shoot me a PM and we will work with you to custom build the car you are looking for.

5910559106591075910859109591105911159112

[talwell]

We also have (1) convertible that is in sheetmetal now that is available. If you choose now, we can paint with any color scheme and customize any suspension and drivetrain options you desire.

[talwell]

Anyone going to the Speed Inc open house tomorrow 6/9 can check out the LS1 T56 car in person. The car is on display there.

[Pro-Mo]

If I may ask, what color blue is that?

Beautiful work by the way. Good luck with the sale.

[talwell]

The blue car is factory color code 71 Lemans Blue w. black stripes.

[talwell]

69 LS1 T56 Camaro still available.

[Bennyt80]

Is this car still forsale ?

[talwell]

Yes, this car is still available. The car will be on the dyno shortly and then it is completely finished.

PM me if you want details or to discuss the car.

[kengi1600]

Nice what red is on the convertible....lol Just read it Boyds red...beautiful..

[talwell]

The blue 69 Camaro has been listed for sale with RK Motors.

http://www.rkmotorscharlotte.com/sales/inventory/active#!/1969-Chevrolet-Camaro-Z-28/132985

The silver car is ready for dyno tuning. The full Dynatech header and exhaust system is installed and looks great. We will upload some video of the dyno tune session shortly.

61170

61171

[talwell]

We still have a few 1969 Pro Touring Camaros available.

Currently being built:

1969 Camaro Coupe - LS1 & T56 Vintage AC, Leather Interior, 4 Wheel Discs
1969 Camaro Convertible - Triple Black, Leather Interior, LS2, T56 Vintage AC, 4 Wheel Discs, Power Cloth Top, Keyless Ignition
1969 Camaro Convertible - Boyds Red w. Blk Top & Blk Interior, LS2, T56, Vintage AC, Leather Interior, 4 Wheel Discs, Power Cloth Top

Currently Completed:

1969 Camaro Coupe - Lemans Blue w. LS2 & T56, Vintage AC, 4 Wheel Discs, Rushfurth Wheels. Available for Purchase Through RK Motors http://www.rkmotorscharlotte.com/sales/inventory/active#!/1969-Chevrolet-Camaro-Z-28/132985

Available For Build:

1970 Chevelle - Rust Free
1970 Nova - Rust Free
1978 Z-28 - Rare Factory Blk w. White Interior, Factory T-Tops & Factory 4 Speed
(2) 1971 Plymouth Cuda
1970 Plymouth Cuda Convertible - Converted to 1971 Cuda Clone

[talwell]

Cars still available - if you are looking for a car built to your specs just send me a PM.

[talwell]

Many cars still available. If you are looking for a pro touring 69 Camaro please let me know.

-Todd

[MK69RSSS]

Still like the blue car....did it sell?

[Tango68SS]

Many cars still available. If you are looking for a pro touring 69 Camaro please let me know.

-Todd

Todd,

Update on the Red 'vert??

[laspisa]

Todd, cars look great. How did the silver 69 engine compartment turn out? Figure out a way to mount the a/c compressor lower and where did you remote mount the coils? Thanks, Dave

[dankkn]

do you still have the silver , red and blue one?

[talwell]

Blue car is at RK Motors and still available. The black convertible is getting drivetrain work completed and should be available soon. The red car is getting assembled now and will be going for drivetrain soon.

The Camaro is all completed and still available. I will get some more pictures of the car uploaded.

We have been rather busy as we are also building another 1969 Camaro convertible for a major vendor as well as (2) 1970 Chevelles.

[Aussie Mick]

G'day from OZ,

Have guys ever created a RHD version for any of these Camaros? Looking at sourcing something like these in the future.

Thanks

Mick

[Vetterodder com]

Todd
Do you have a website I could visit?
The pricing once it gets to the brokers is insane compared to working directly with you if the need should arise. Do you have your own shop or company? How do you work it?

Dan
www.vetterodder.com.

[69LSX]

Todd, are the Centerlines on the silver Camaro 17's or 18's ?

[Deji]

Few more pics of silver 69 LS1 T56 Camaro

60636

60637

60638

60639

60640

Would like to do a build just like blue one but in yellow, and tci 6x, auto (its for the wife) wanted to know how much up front, and how long. My email is jcdrenovations@aol for contact.

[talwell]

The Centerlines on the Camaro are 17's unless I am mistaken. We had these brand new from another project and put them on the Camaro to move it around and ended up liking the look.

[69LSX]

The Centerlines on the Camaro are 17's unless I am mistaken. We had these brand new from another project and put them on the Camaro to move it around and ended up liking the look.

Okay. I would have guessed 18's. If you have a chance to confirm next time you're in the shop, I'd appreciate it. Thanks !

[talwell]

We just acquired (2) more really clean 1969 Camaro bodies from Washington and (1) more coming in from Arizona.

If you are still interested in a custom built car shoot me a pm and we can discuss the options with you. Our base 69 Camaro with LS & 6 speed starts at just $59,500.00.

[talwell]

The Camaro is now running and scheduled for dyno tuning. Anyone that is still interested in the car please PM me and I can get you more details on it.

[dirtydave]

hey , I like the silver 69 camaro. would you tell me what is the wides tire rim combo I can run on a stock 69 camaro, like the look but don't want to cut the car. thanks

[Trevor @ Texas Speed]

...

[talwell]

69 Camaro is complete and ready for new owner. We also have another '69 coupe donor car available for build.

We will consider equal value trades on the 1969 Camaro coupe - pm me with what you have.

[talwell]

FYI, Todd is a stand-up guy to deal with! I contacted him in June to inquire about building a new project for us. We supply lots of packages for the 1st gen f-bodies, but we do not do any builds in house with respect to paint, body, interior, etc. The quality of his work and the short build time peaked my interest. After talking, I decided to move forward with the build with Todd. He's building a '69 Camaro convertible for us that will be used to showcase a lot of the parts and packages that we offer. Never met him face to face, and I wired $30,000 to him to get the project started. He more than put my mind at ease after talking to him on the phone. He has kept me in the loop the entire time, and he has accommodated every request, such as a smoothed firewall and mini tubs. He has lots of great ideas that I never would have thought to do, and it's going to make the car absolutely awesome when it's completed! He also has been more than reasonable for the additions that we have made over the base package. Since the car is meant to showcase parts and packages that we offer, we needed to supply the full drivetrain and powertrain. He wasn't bother by this at all. It has full Speed Tech Performance suspension under it (sub-frame, torque arm setup, Chicane full floater rearend, subframe connectors, etc.), Baer 14" brakes front and rear, TSP 700 HP 6.2L LSA turn-key engine package, and a T-56 six-speed manual trans! I can't say enough great things about his operation. We started with a Dynacorn body that he already had, and this car will be completed start to finish in less time than it has taken to get the interior completed in my '69 coupe! The convertible project isn't complete yet, and I'm already thinking about a '55 Bel Air on an aftermarket chassis. :) They started working on the bare body in August, and the car already has full body and paint work completed, full suspension under it, body wiring complete, and rolling around on wheels and tires! He has certainly earned my business, and I would NOT hesitate to let him build your car! He truly takes the headache out of building cars. Feel free to contact me if you would like more information or to verify my business dealings with Todd. He has helped us a lot in making this build run smooth, and I am more than happy to help him gain more business.

:cheers:

Trevor
Texas Speed & Performance

Trevor,

Thank you for the kind words in regards to our relations in building your car. It has been my pleasure to work with you and your team @ Texas Speed and I am sure you will be very satisfied with your car once completed.

[talwell]

1969 Camaro still available.

[Fbody]

Do you have any updates of the black convertible? I may be interested in that car

[CKBG69]

hello could you tell me if you have any 69 camaros for sale or any links i can view if so,ty

[talwell]

1969 Camaro has sold. The LeMans Blue LS2 6 Speed car is still available as well as the black and red convertibles. We do have another donor 69 coupe ready to start a build on as well.

[vox]

can you send me your contact info?

Thanks
Andy

[KOTYKB]

Please PM me your contact info, I would like to price out a build.

[Chazmichealmichealz]

Todd,
Do you have a personal or company website? Would like to take a look at more of your projects'

[redsand]

Sent pm on convert.

[Gemelli]

Did the broker sell the blue car?

[talwell]

Blue 1969 Camaro was sold to a buyer in Wisconsin. We have quite a few cars under construction at this time. Let me know if I can be of any help to you.

-Todd

[yz250fpilot]

I have been looking for a pt 67 or 69 convertible Camaro. My preference is tuxedo black with white hockey stripes, LS powered and a white top. Do you have anything like this in the works?

Thanks,
Steve