e40 ECM Startup tune

[GeoffP]

Does anyone have a favorite tuner or recommendation of someone who I can send my e40 ECM to for a startup tune? My engine is a stock spec LS1 that's had the proper stuff changed to run the e40 ECM from a GTO. I just need someone that'll do a good job without breaking my wallet in half.

I appreciate any suggestions - hoping to have my car running with the new engine inside 4 weeks!

[dhutton]

I used Geoff at Engine Power Systems with good results:

http://www.engpwrsys.com/index.php?act=viewCat&catId=42

My cam was a custom Pat G spec using EPS lobes so that may have helped.

[GeoffP]

Thanks! I'll give them a call tomorrow.

[HwyStarJoe]

PCM of NC was great, and they ask all the right questions before starting the reprogramming.
http://www.pcmofnc.com/index.php/tuning/tuning/product/799-pontiac-gto-2005-2006

[Ron.in.SoCal]

I used Geoff at Engine Power Systems with good results:

http://www.engpwrsys.com/index.php?act=viewCat&catId=42

My cam was a custom Pat G spec using EPS lobes so that may have helped.

Nothing but great feedback on EPS. You may also want to try:

http://www.tunedbyfrost.com/services2.htm

[GeoffP]

Wow talk about digging up an old thread. My car's been running on Geoff @ EPS' tune for over a year. I ran it for the first time last year at RToS. I had an opportunity to get Mike Norris to look at the tune at RToS because I wanted to check the cooling fan tables and he advised that it looked like a good tune for a stock LS1 with open intake and exhaust. Mike had no suggestions on top of what Geoff had already done.

The engine runs S-T-R-O-N-G and has a ton of torque compared to the old engine, which was a heavily modded LT1 with a CC305 cam. I've let a couple guys ride along and drive the car. Both said it was pretty strong for a fresh built LS1. I'm really happy with how it turned out even though I'd love to have a lopey idle like the LT1 did...