Opinions on this combo.....

[Yenko boy]

I havent starting building this engine yet im still in planning stages. Just give me opinons on what you guys think as well as how much HP I should be expecting. How do you guys think the Bore stroke combo will work out? Turns out to be 505ci. Thanks.

Merlin lll block 4.625 Bore
Scat forged 3.76 crank
jesel valve train/Isky red zonelifters
Brodix Race Right CNC oval heads
Cam-lunati 502a4 adv dur:287/295 dur @50:256/264 lift:660/660 lobe sep:110 rpm range;3,000-7,000rpm
edelbrock 454-O intake
SRP pistons with heads comp ratio is 10:5:1
Manley 6.135 Rods
Holley 950hp carb?

[SSMOORE]

what is the motor intended for? Drag car? Street? Or alot of street a little Drag? Looks like your building it to rev. Short stroke big bore? Cam looks a little big for a street car but thats subjective. Might be ok tho with 505 ci. I guess 675 to 700 hp /550 to 600 tq

steve

[Yenko boy]

Building it to be a street/strip capable.