PDA

View Full Version : Wheels set for sale $4000.00


lesone
02-02-2012, 11:11 PM
5503955038 Bolt Patter is 5 x 4.5
Thanks for looking
LowFast
02-03-2012, 02:58 AM
Wow those are nice, you should show a full side profile of the car. Also people are going to need the backspacing on each.
lesone
02-03-2012, 09:28 AM
Wow those are nice, you should show a full side profile of the car. Also people are going to need the backspacing on each.

Thanks for the heads up. I knew i forgot something, i rarely post. Thanks again, will put up measurements asap
Mr.VENGEANCE
02-03-2012, 11:18 AM
whoa, someones got a man-which set of wheels!
drflex
02-03-2012, 07:42 PM
whats the deal with the stang? dead project or changing directions?
lesone
02-07-2012, 11:58 AM
whats the deal with the stang? dead project or changing directions?
Yes sorry to say but the stang is a dead project...
lesone
02-07-2012, 12:00 PM
Wow those are nice, you should show a full side profile of the car. Also people are going to need the backspacing on each.

Front wheels back space is 5" and outter of wheel center to lip is 3 1/4
Rear wheel back space is 5 1/4 and " is 9 1/4.. Thanks again for heads up, sorry i took so long on posting
CornHusker4Life
02-08-2012, 08:07 AM
Bump for a nice set-up.
6D9 Matt
02-08-2012, 10:16 AM
Meaty :cheers:
AintQik
02-08-2012, 12:01 PM
I'd like the wheels if the Mustang came with them!
INHEAVEN
02-08-2012, 05:39 PM
whats the bolt pattern?
lesone
02-08-2012, 07:39 PM
whats the bolt pattern?

Such a bonehead sorry.. It's a 5X4.5 bolt pattern
zbugger
02-08-2012, 07:46 PM
You need to post up a location. Preferably the one where the wheels are.
Jeff70
02-08-2012, 10:14 PM
Dead project that sucks.

Is their gonna be any other parts you will be selling? Where are you located?
lesone
02-09-2012, 10:59 AM
You need to post up a location. Preferably the one where the wheels are.
I'm in my neck of the woods.. My Location is San Mateo, CA..
lesone
02-09-2012, 11:03 AM
Dead project that sucks.

Is their gonna be any other parts you will be selling? Where are you located?

Yea dead project really does suck especially when it was my 1st car.. I went in over my head with this one. Wish i was a DIY'er like most of you guys so it would alot cheaper, oh well. If the person does not come through i want to sell the car and wheels if no one buys the wheels. Has a full frame art morrison chassis with shortend rear end to accomodate the wheels, wilwood brakes all around.. Will post pics if deal does not happen.. Thanks for lookin
Jeff70
02-09-2012, 11:22 AM
Your not far Im in the north bay.

If you end up parting out everything i'm looking for a few OE items.
joeelutz
02-12-2012, 03:07 PM
Maybe I missed it, but what are the wheel widths? I see the tire size and it looks like you have 20's on the rear and 19's on the front, but no width.
Thanks.
2blownstangs
03-16-2012, 06:22 PM
What are you looking to get for the car with and without the wheels and tires? Thanks