DynoDon
12-28-2011, 05:00 PM
OK, Here's the deal. As some of you know, I run the R & D Shop for the PerTronix Exhaust Division, which includes Doug's Headers, Patriot Exhaust Products and JBA Performance Exhaust. We are looking for A 73-84 C10 with an LS swap to develop headers on. It will need to use mounts like ours, or we can install ours.
https://static1.pt-content.com/images/pt/2011/12/SK100-1.jpg
I plan on two designs - a Mid Length for the severely lowered and a tight fitting Long Tube. If you can make your truck available to us at our Irwindale, CA location for about 2 weeks max, you will get a set of Ceramic Coated Headers out of the deal! This can be a done running truck or one that is in the project stage.
Let me know, either PM or [email protected]
https://static1.pt-content.com/images/pt/2011/12/SK100-1.jpg
I plan on two designs - a Mid Length for the severely lowered and a tight fitting Long Tube. If you can make your truck available to us at our Irwindale, CA location for about 2 weeks max, you will get a set of Ceramic Coated Headers out of the deal! This can be a done running truck or one that is in the project stage.
Let me know, either PM or [email protected]