Comp Eng/JRS/GMR Full Floater 9" Housing

[GrnDragon]

Custom full floater fabricated Ford 9" bare housing with the following:

-Competition Engineering offset housing (Pinion is centered in the car)
-Some JRS bracketry (LCA/Coilover mount brackets, and Watts Bar Mounts)
-Custom one-off gusset work by Jason at GMR
-5x4.75 1/2" stud 35 spline Full Floater kit (the kit is a prototype unit from GMR, it is NOT their new setup being offered)
-Wheel mount surface (WMS) to WMS width is 58.5"
-The Hubs use 7703 ARP studs
-There are custom brake brackets welded on the housing, that could be used with a custom brake setup.

I am selling because I ended up also getting the New Production GMR hubs and they use a different snout, so I just bought a new housing for them instead of cutting this one apart.

ASKING: $1200 + shipping
PM me if interested and I can send more pictures...

52683


52684


52685


52686


52687


52688


52689

[GrnDragon]

Here is some more information on the setup...

The brake brackets are setup for a custom brake kit I designed. It wouldn't be much issue to cut them off if you cannot use them, but then you would need to weld on another brake bracket of some sort so it might be a better idea to just make a secondary bracket to adapt to what is on the housing.

The Main Caliper holes are 5.09" apart and 2.915" off axle centerline. The other holes are for a mechanical ebrake caliper.

The width between the lower link brackets is 39.875" Center to Center.

The Watts Link Bars are 27" from center to center (Horizontally) and 5.0" center to center (Vertically, proper distance for Fays Propeller), and 9" back from centerline of axle tube.

[GrnDragon]

Any interest in the new year?

[GrnDragon]

To The Top!

[GrnDragon]

I've had a couple interested, but no money yet.

If you can use this housing without modifying much, it is a SMOKING deal, just buying a floater kit of this level is MUCH more than $1200...

[81S]

Sold.

[GrnDragon]

Oh yeah....SOLD!!!
Thanks 81S, hopefully it's there Monday (the tracking number hasn't updated since 2/28 when it arrived in Portland?)

[81S]

Still looking good for monday