new tool I got informed about

[MonzaRacer]

http://www.lazzemetalshaping.com/index.php?page=shop.product_details&flypage=shop.flypage&product_id=30&option=com_virtuemart&Itemid=1&vmcchk=1&Itemid=1

[dontlifttoshift]

Cool, but I didn't see what was new about it.

[MrQuick]

new to lee....but save a few bucks. http://www.mittlerbros.com/index.php/mittler-bros/shrinker-stretcher/power-shrinker-stretcher.html

[dontlifttoshift]

Here is what i got. http://www.tptools.com/p/478,227_Shrinker-and-Stretcher-Kit-with-Deluxe-11-Gauge-Welded-Stand.html Once in a while they run it on sale for 389 ish with the stand. The stand is awesome for this style shrinker stretcher.

That powered one from MB looks cool but part of doing shrinking stretching with a lancaster style tool is the "feel". I would think it would be real easy to overwork the metal or go too far with the powered setup.

[MrQuick]

Here is what i got. http://www.tptools.com/p/478,227_Shrinker-and-Stretcher-Kit-with-Deluxe-11-Gauge-Welded-Stand.html Once in a while they run it on sale for 389 ish with the stand. The stand is awesome for this style shrinker stretcher.

That powered one from MB looks cool but part of doing shrinking stretching with a lancaster style tool is the "feel". I would think it would be real easy to overwork the metal or go too far with the powered setup. very true but them small bars kill my forearms. Is there a Landcaster dealer? Might be cheaper for Lee to buy direct.

I bought a shrinker/stretcher jaw set and one press tool. I made this stand and am working on the foot pedal stuff. Similar to the Lazze one. Manuel labor style.