PDA

View Full Version : moser 9",baer floater,DSE quad brackets,35 spline axles


greg5436
10-27-2011, 12:36 PM
got a 9" moser housing with baer full floater kit and DSE quadralink brackets all installed. .comes with moser 35 splined axles. i do have the baer e-brake assemblythat is made for the floater.no calipers or rotors or 3rd member comes with it. 54 1/2 flange to flange. was going to put it in a 69 camaro but took so long had to go a different route.if interested pm me or call greg 636-346-3494 thanks pro-touring
toofun
10-27-2011, 12:51 PM
Price please??
greg5436
10-27-2011, 01:19 PM
2400.00 plus shipping
GRNOVA
10-27-2011, 03:27 PM
Good luck with the sale.
badazz81z28
10-29-2011, 10:51 AM
2400.00 plus shipping

I'm interested, but confused on the price. Did you mean it DOES come with the 3rd member or not? Thats an insane price for a bare housing and axles.
GRNOVA
10-29-2011, 12:39 PM
no calipers or rotors or 3rd member comes with it.

You r correct!
greg5436
10-29-2011, 02:57 PM
housing is not a bare housing it has all the DSE quadralink brackets installed and it come with the complete Baer floater kit.the floater kit alone is 1500,
Bill Howell
10-29-2011, 04:44 PM
Would the DSE brackets be in the right location if used on a second gen f-body?
greg5436
10-29-2011, 04:51 PM
Bill that would be a question for the techs at DSE.I am a A body guy and this is my first camaro so I am not sure. Greg
badazz81z28
10-29-2011, 05:25 PM
Would the DSE brackets be in the right location if used on a second gen f-body?

If that was the case, can you buy the rest of the set-up seperate?
greg5436
10-29-2011, 06:06 PM
DSE sold me all the rear end brackets separate to put on different housing so I would think they would sell a kit with no housing brackets to you,but wouldn't hurt to ask.also I think they sold me all the rear brackets for 200-220. Greg
69maroSS
10-30-2011, 05:30 AM
Is that 54 1/2" housing flange to flange, or axle flange to flange? I'm looking for a narrow one, so I'm hoping it's an axle measurement!
69maroSS
10-30-2011, 05:52 AM
I guess I should say wheel mounting surface since it's a floater....
greg5436
10-30-2011, 05:54 AM
It is axle flange to axle flange.I got a set of fordgeline wheels 18x12 with 5.4 inch backspacing.any other info let me know. Greg
greg5436
10-30-2011, 05:56 AM
You are right it would be wheel surface mounting